خوب شما کلا bind پاک کنید و دسی نصب کنید برای ایجاد نیم سرور هم من براتون یک فایل اتو کریتور مینویسم شما فقط پاسخ سوالهارو بدید
انشالله که درست میشه
کد PHP:
service named stop
chkconfig named off
cd /tmp
wget http://www.nlnetlabs.nl/downloads/nsd/nsd-4.1.0.tar.gz
cd nsd-*
./configure
make
make install
groupadd nsd
useradd -g nsd -s /sbin/nologin -M nsd
mkdir -p /var/run/nsd
chown -R nsd:nsd /var/run/nsd/
chown -R nsd:nsd /var/db/nsd/
mkdir -p /etc/nsd
mkdir -p /etc/nsd/master
mkdir -p /etc/nsd/slave
chown -R nsd:nsd /etc/nsd/
کد PHP:
nano /etc/nsd/nsd.conf
کد PHP:
server:
hide-version: yes
tcp-count: 100
tcp-query-count: 0
tcp-timeout: 60
pidfile: "/var/run/nsd/nsd.pid"
zonesdir: "/etc/nsd"
کد PHP:
mkdir /etc/nsd/master
nano /etc/sysconfig/nsd
کد PHP:
# /etc/sysconfig/nsd
# Configuration for /etc/init.d/nsd
OTHER_NSD_OPTS=""
#extra verbosity
#ZONEC_VERBOSE=-v
# You might also need to change SElinux policies if you decide
# to deviate from the standard locations below.
# Main configuration file
#NSD_CONF="/etc/nsd/nsd.conf"
# NSD DB
#NSD_DB="/var/db/nsd/nsd.db"
# Path to nsdc program
#NSDC_PROG="/usr/local/sbin/nsdc"
# Path to nsd program
#NSD_PROG="/usr/local/sbin/nsd"
# NSD pid file
#NSD_PIDFILE="/var/run/nsd/nsd.pid"
# NSD zone transfer daemon state file (should equal to the xfrdfile
# parameter set in nsd.conf)
#NSD_XFRDFILE="/var/db/nsd/xfrd.state"
# EOF
کد PHP:
nano /etc/init.d/nsd
کد PHP:
#!/bin/bash
#
# nsd: Starts the NSD Name Server Daemon
#
# chkconfig: - 13 87
# description: NSD is a complete implementation of an authoritative \
# DNS name server.
# processname: /usr/local/sbin/nsd
# config: /etc/nsd/nsd.conf
#
### BEGIN INIT INFO
# Provides: nsd
# Required-Start: $local_fs $network $syslog
# Required-Stop: $local_fs $network $syslog
# Default-Stop: 0 11 89
# Short-Description: start|stop|status|restart|try-restart|reload|force-reload DNS server
# Description: control NSD implementation of DNS server
### END INIT INFO
# Init script default settings
NSD_CONF="/etc/nsd/nsd.conf"
NSD_DB="/var/db/nsd/nsd.db"
NSD_PROG="/usr/local/sbin/nsd"
NSD_PIDFILE="/var/run/nsd/nsd.pid"
NSD_XFRDFILE="/var/db/nsd/xfrd.state"
NSDC_PROG="/usr/local/sbin/nsdc"
# Source function library.
. /etc/rc.d/init.d/functions
[ -r /etc/sysconfig/nsd ] && . /etc/sysconfig/nsd
# Check that networking is configured.
[ "${NETWORKING}" = "no" ] && exit 0
start() {
# Source networking configuration.
[ -r /etc/sysconfig/network ] && . /etc/sysconfig/network
# Check that networking is up
[ "${NETWORKING}" = "no" ] && exit 1
# Sanity checks.
[ -f $NSD_CONF ] || exit 5
[ -x $NSD_PROG ] || exit 5
echo -n $"Starting nsd:"
$NSDC_PROG -c $NSD_CONF rebuild >/dev/null 2>%1
$NSD_PROG -c $NSD_CONF $OTHER_NSD_OPTS
RETVAL=$?
echo
if [ $RETVAL -eq 0 ]; then
touch /var/lock/subsys/nsd;
else
exit 7;
fi
return 0;
}
stop() {
echo -n $"Stopping nsd: "
# save state to zonefiles
$NSDC_PROG -c $NSD_CONF patch > /dev/null 2>%1
$NSDC_PROG -c $NSD_CONF stop
RETVAL=$?
# was nsdc successful?
[ "$RETVAL" -eq 0 ] || killproc $NSD_PROG -TERM >/dev/null 2>&1
if [ $RETVAL -eq 0 ] ; then
rm -f $NSD_PIDFILE
rm -f /var/lock/subsys/nsd
# ensure notifies are sent at startup
rm -f $NSD_XFRDFILE
fi
echo
return $RETVAL
}
restart() {
stop
start
}
RETVAL=0
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
restart)
restart
;;
condrestart)
[ -f /var/lock/subsys/nsd ] && restart || :
;;
status)
$NSDC_PROG -c $NSD_CONF running
;;
stats|reload|rebuild|running|update|notify)
$NSDC_PROG -c $NSD_CONF $1
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart|stats|notify|reload|rebuild|running|update}"
exit 1
esac
exit $?
کد PHP:
chmod +x /etc/init.d/nsd
chkconfig --levels 235 nsd on
اینم فایل برای ایجاد اتوماتیک
کد PHP:
read -ep "Enter domain name you want to add to NSD (without www. prefix): " vhostdomainname
echo ""
read -ep "Enter IP address you want to assign to domain name (your A record): " vhostdomainip
echo "---------------------------------------------------------"
echo "You entered domain name: $vhostdomainname"
echo "You entered domain IP address (A record): $vhostdomainip"
echo "---------------------------------------------------------"
echo ""
read -ep "Are the domain name and IP address (A record) entered correctly ? [y/n]: " domaininfocorrect
if [[ "$domaininfocorrect" = [yY] ]]; then
vhostdomainname="$vhostdomainname"
vhostdomainip="$vhostdomainip"
echo ""
echo "---------------------------"
echo "Nameserver ns1/ns2 setup:"
echo "---------------------------"
echo ""
read -ep "Want to abort NSD setup to check with web host and/or domain registrar first ? [y/n]: " abortnsdsetup
if [[ "$abortnsdsetup" = [yY] ]]; then
echo ""
echo "Aborting NSD domain DNS setup..."
echo ""
exit
fi
read -ep "* Enter IP address for ns1 nameserver: " nameserverip1
echo ""
read -ep "* Enter IP address for ns2 nameserver: " nameserverip2
echo "--------------------------------------------------------------"
echo "You entered ns1.$vhostdomainname IP address: $nameserverip1"
echo "You entered ns2.$vhostdomainname IP address: $nameserverip2"
echo "--------------------------------------------------------------"
echo ""
read -ep "Are the ns1/ns2 name server IP address entered correct ? [y/n]: " nscorrect
if [[ "$nscorrect" = [yY] ]]; then
echo ""
NSDCONFDOMAINCHECK=`grep -E '("${vhostdomainname}"|"master/${vhostdomainname}.zone")' /etc/nsd/nsd.conf`
echo "---------------------------------------------"
echo "checking to see if entry for ${vhostdomainname} already exists in /etc/nsd/nsd.conf"
echo "---------------------------------------------"
echo ""
if [[ -z $NSDCONFDOMAINCHECK ]]; then
echo "---------------------------------------------"
echo "no entry for ${vhostdomainname} found in /etc/nsd/nsd.conf"
echo "creating entry for ${vhostdomainname} ..."
echo "---------------------------------------------"
echo ""
# Setting up nsd.conf entry
cat >> "/etc/nsd/nsd.conf" <<END
zone:
name: "$vhostdomainname"
zonefile: "master/$vhostdomainname.zone"
END
cat /etc/nsd/nsd.conf
else
echo "---------------------------------------------"
echo "entry for ${vhostdomainname} already exists in /etc/nsd/nsd.conf"
echo "$NSDCONFDOMAINCHECK"
echo "---------------------------------------------"
echo ""
fi
if [ ! -f /etc/nsd/master/${vhostdomainname}.zone ]; then
touch /etc/nsd/master/${vhostdomainname}.zone
cat > "/etc/nsd/master/${vhostdomainname}.zone" <<END
\$TTL 14400
@ IN SOA ns1.$vhostdomainname. hostmaster.$vhostdomainname. (
2010091500
14400
3600
1209600
86400 )
; Nameservers
$vhostdomainname. 14400 IN NS ns1.$vhostdomainname.
$vhostdomainname. 14400 IN NS ns2.$vhostdomainname.
; A Records
$vhostdomainname. 14400 IN A $vhostdomainip
ftp 14400 IN A $vhostdomainip
localhost 14400 IN A 127.0.0.1
mail 14400 IN A $vhostdomainip
ns1 14400 IN A $nameserverip1
ns2 14400 IN A $nameserverip2
pop 14400 IN A $vhostdomainip
smtp 14400 IN A $vhostdomainip
www 14400 IN A $vhostdomainip
; MX Record
$vhostdomainname. 14400 IN MX 10 mail
; TXT Record (for SPF)
$vhostdomainname. 14400 IN TXT "v=spf1 a mx ip4:$vhostdomainip ~all"
END
echo "---------------------------------------------"
echo
echo "---------------------------------------------"
echo "Creating zone file at /etc/nsd/master/${vhostdomainname}.zone"
echo "---------------------------------------------"
cat /etc/nsd/master/${vhostdomainname}.zone
echo
echo "---------------------------------------------"
echo "Current zone files listing at: /etc/nsd/master/"
ls -Alhrt /etc/nsd/master/ | awk '{ printf "%-4s%-4s%-8s%-6s %s\n", $6, $7, $8, $5, $9 }'
echo "---------------------------------------------"
echo
echo "---------------------------------------------"
echo "NSD entry for $vhostdomainname created successfully in /etc/nsd/nsd.conf"
echo "NSD zone created at /etc/nsd/master/${vhostdomainname}.zone"
echo
exit
else
echo ""
echo "---------------------------------------------"
echo "/etc/nsd/master/${vhostdomainname}.zone already exists"
echo "---------------------------------------------"
echo ""
echo ""
exit
fi # check if zone already exists
else
echo "-------------------------------"
echo "Aborting NSD setup... try again"
echo "-------------------------------"
exit
fi # check if nameserver ip addresses correct
else
echo "-------------------------------"
echo "Aborting NSD setup... try again"
echo "-------------------------------"
exit
کـــــــــــــمــــــــــ ک ------> Domain, DNS(Bind), ns1, ns2
پاسخ با نقل قول
پاسخ : کـــــــــــــمــــــــــ ک ------> Domain, DNS(Bind), ns1, ns2
نوشته اصلی توسط 007
