نقل قول نوشته اصلی توسط OmidX نمایش پست ها
شما خروجی ifconfig -a رو قرار بدید، الان میخواید فقط از DNAT استفاده کنید ؟ یا SNAT هم دارید ؟ (پورت ها رو فعلا برای تست any to any باز کنید.)

و اینکه اگر با چند آی پی local به یک آی پی Valid نت بشید که رو همشون سی پنل نصب باشه، فقط آی پی اول map میشه. و مورد بعدی DNS Zone ها رو چک کردید که رکورد ها به سمت ip valid شما باشن ؟ اگه همه این موارد درست هست یکبار rebuild کنید ویرچوال هاست ها رو مشکل حل میشه.
خروجی ifconfig:

eno1: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 14:02:ec:4214 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16


eno2: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 14:02:ec:4215 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17


eno3: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 14:02:ec:4216 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16


eno4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::1602:ecff:fe42:7217 prefixlen 64 scopeid 0x20<link>
ether 14:02:ec:4217 txqueuelen 1000 (Ethernet)
RX packets 323324 bytes 320819104 (305.9 MiB)
RX errors 0 dropped 3398 overruns 0 frame 0
TX packets 201369 bytes 57673098 (55.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17


lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 32327 bytes 8131767 (7.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 32327 bytes 8131767 (7.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0


virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 5200:cd:00:10 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0


virbr0-nic: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 5200:cd:00:10 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0