lighttpd php error 403

دوستان این هم از مشکل اخیر . البته تاپیک دیگه ای هم برای سر رشته ی این مشکل زدم .
ممنون میشم کمکم کنید . همه ی فایل ها و پسوند هارو میتونم دانلود یا باز بکنم غیر از پی اچ پی .
کانفیگ لایت تی پی دی

کد PHP:

---

# lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $  ############ Options you really have to take care of ####################  ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules              = ( #                               "mod_rewrite", #                               "mod_redirect", #                               "mod_alias",                                 "mod_access", #                               "mod_trigger_b4_dl", #                               "mod_auth", #                               "mod_status", #                               "mod_setenv", #                               "mod_fastcgi", #                               "mod_*****", #                               "mod_simple_vhost", #                               "mod_evhost", #                               "mod_userdir", #                               "mod_cgi", #                               "mod_compress", #                               "mod_ssi", #                               "mod_usertrack", #                               "mod_expire", #                               "mod_secdownload", #                               "mod_rrdtool",                                 "mod_accesslog" )  ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root        = "/home/admin/7th/"  ## where to send error-messages to server.errorlog             = "/var/log/lighttpd/error.log"  # files to check for if .../ is requested index-file.names            = ( "index.php", "index.html",                                 "index.htm", "default.htm" )  ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X  # mimetype mapping mimetype.assign             = (   ".rpm"          =>      "application/x-rpm",   ".pdf"          =>      "application/pdf",   ".sig"          =>      "application/pgp-signature",   ".spl"          =>      "application/futuresplash",   ".class"        =>      "application/octet-stream",   ".ps"           =>      "application/postscript",   ".torrent"      =>      "application/x-bittorrent",   ".dvi"          =>      "application/x-dvi",   ".gz"           =>      "application/x-gzip",   ".pac"          =>      "application/x-ns-*****-autoconfig",   ".swf"          =>      "application/x-shockwave-flash",   ".tar.gz"       =>      "application/x-tgz",   ".tgz"          =>      "application/x-tgz",   ".tar"          =>      "application/x-tar",   ".zip"          =>      "application/zip",   ".mp3"          =>      "audio/mpeg",   ".m3u"          =>      "audio/x-mpegurl",   ".wma"          =>      "audio/x-ms-wma",   ".wax"          =>      "audio/x-ms-wax",   ".ogg"          =>      "application/ogg",   ".wav"          =>      "audio/x-wav",   ".gif"          =>      "image/gif",   ".jar"          =>      "application/x-java-archive",   ".jpg"          =>      "image/jpeg",   ".jpeg"         =>      "image/jpeg",   ".png"          =>      "image/png",   ".xbm"          =>      "image/x-xbitmap",   ".xpm"          =>      "image/x-xpixmap",   ".xwd"          =>      "image/x-xwindowdump",   ".css"          =>      "text/css",   ".html"         =>      "text/html",   ".htm"          =>      "text/html",   ".js"           =>      "text/javascript",   ".asc"          =>      "text/plain",   ".c"            =>      "text/plain",   ".cpp"          =>      "text/plain",   ".log"          =>      "text/plain",   ".conf"         =>      "text/plain",   ".text"         =>      "text/plain",   ".txt"          =>      "text/plain",   ".dtd"          =>      "text/xml",   ".xml"          =>      "text/xml",   ".mpeg"         =>      "video/mpeg",   ".mpg"          =>      "video/mpeg",   ".mov"          =>      "video/quicktime",   ".qt"           =>      "video/quicktime",   ".avi"          =>      "video/x-msvideo",   ".asf"          =>      "video/x-ms-asf",   ".asx"          =>      "video/x-ms-asf",   ".wmv"          =>      "video/x-ms-wmv",   ".bz2"          =>      "application/x-bzip",   ".tbz"          =>      "application/x-bzip-compressed-tar",   ".tar.bz2"      =>      "application/x-bzip-compressed-tar",   # default mime type   ""              =>      "application/octet-stream",  )  # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr        = "enable"   ## send a different Server: header ## be nice and keep it at lighttpd # server.tag                 = "lighttpd"  #### accesslog module accesslog.filename          = "/var/log/lighttpd/access.log"  ## deny access the file-extensions # # ~    is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part #      of the document-root url.access-deny             = ( "~", ".inc" )  $HTTP["url"] =~ "\.pdf$" {   server.range-requests = "disable" }  ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )  ######### Options that are good to be but not neccesary to be changed #######  ## bind to port (default: 80) #server.port                = 80  ## bind to localhost (default: all interfaces) #server.bind                = "127.0.0.1"  ## error-handler for status 404 #server.error-handler-404   = "/error-handler.html" #server.error-handler-404   = "/error-handler.php"  ## to help the rc.scripts server.pid-file            = "/var/run/lighttpd.pid"   ###### virtual hosts ## ##  If you want name-based virtual hosting add the next three settings and load ##  mod_simple_vhost ## ## document-root = ##   virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ##   virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root   = "/srv/www/vhosts/" #simple-vhost.default-host  = "www.example.org" #simple-vhost.document-root = "/htdocs/"   ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix    = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix    = "/srv/www/errors/status-"  ## virtual directory listings #dir-listing.activate       = "enable" ## select encoding for directory listings #dir-listing.encoding        = "utf-8"  ## enable debugging #debug.log-request-header   = "enable" #debug.log-response-header  = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found   = "enable"  ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot              = "/"  ## change uid to <uid> (default: don't care) server.username            = "lighttpd"  ## change uid to <uid> (default: don't care) server.groupname           = "lighttpd"  #### compress module #compress.cache-dir         = "/var/cache/lighttpd/compress/" #compress.filetype          = ("text/plain", "text/html")  #### ***** module ## read *****.txt for more info #*****.server               = ( ".php" => #                               ( "localhost" => #                                 ( #                                   "host" => "myi*p", #                                   "port" => 80 #                                 ) #                               ) #                             )  #### fastcgi module ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server             = ( ".php" => #                               ( "localhost" => #                                 ( #                                   "socket" => "/tmp/php.socket", #                                   "bin-path" => "/usr/bin/php-cgi" #                                 ) #                               ) #                            )  #### CGI module #cgi.assign                 = ( ".pl"  => "/usr/bin/perl", #                               ".cgi" => "/usr/bin/perl" ) #  #### SSL engine #ssl.engine                 = "enable" #ssl.pemfile                = "/etc/ssl/private/lighttpd.pem"  #### status module #status.status-url          = "/server-status" #status.config-url          = "/server-config"  #### auth module ## read authentication.txt for more info #auth.backend               = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group"  #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn  = "dc=my-domain,dc=com" #auth.backend.ldap.filter   = "(uid=$)"  #auth.require               = ( "/server-status" => #                               ( #                                 "method"  => "digest", #                                 "realm"   => "download archiv", #                                 "require" => "user=jan" #                               ), #                               "/server-config" => #                               ( #                                 "method"  => "digest", #                                 "realm"   => "download archiv", #                                 "require" => "valid-user" #                               ) #                             )  #### url handling modules (rewrite, redirect, access) #url.rewrite                = ( "^/$"             => "/server-status" ) #url.redirect               = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { #  url.redirect            = ( "^/(.*)" => "http://%1/$1" ) #}  # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern        = "/srv/www/vhosts/%3/htdocs/"  #### expire module #expire.url                 = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")  #### ssi #ssi.extension              = ( ".shtml" )  #### rrdtool #rrdtool.binary             = "/usr/bin/rrdtool" #rrdtool.db-name            = "/var/lib/lighttpd/lighttpd.rrd"  #### setenv #setenv.add-request-header  = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" )  ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10  #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo"  ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php")  #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf"  #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1  ## include configuration snippets, usually provided by packages include_shell "find /etc/lighttpd/conf.d -maxdepth 1 -name '*.conf' -exec cat {} \;" 


---