کمک به یک مبتدی+هزینه

[torkidatir]

سلام به همه از جمله کسانی می خواهند به ضعیف کمکی کنند

این ناتوان دیروز در سایت آقای احمد چوپانی مطالبی خواند خیال کرد چیز جدیدی یاد گرفته برای همین به سایت هاست کده رفت و سرور لینوکسی
با رم 256 رو خریداری کرد اونها به حقیر دو آیپی با دو رمز با دو یوزر که یکیش root هست رو دادن و یکی آیپی آن 79.143.176.63 این هست بنده با مطالبی که در اینجا و سایت آقای احمد چوپانی خوانده بودم شروع کردم به انجام عملیاتی که باور کنید 90 درصد کارهایی رو که کردم نفمیدم

حافظه ی استفاده شده از 500 ،600 رفته رو 1.5گیگ!

میخواستم بگید چطور می تونم مثل اولش کنم پاک پاک بعد کانفیگ مورد نیاز، من بلدم ویندوز کامپوترم رو نصب کنم بعد نصب، شروع می کنم به نصب درایور های سیستم بعد آنتی ویروس و آفیس و برنامه های ضروری دیگر

من خیال می کنم سرور هم همین جوری هست لطفا به من اطلاعات جامعی بدهید من در ابتدا بعد کانفیگ اولیه می خوام سیستم وبلاگ دهی درست کنم
مثل ورد پرس لطفا راه رو به صورت اجمالی نه کامل بگید چون ممکنه به زحمت بفتید من هم خدا وکیلی راضی به زحمت نیستم
با تشکر فراوان علیرضا آقایی 16 ساله

[kaajhost]

با سلام
لطفا توضیح بیشتری بدهید تا بتوانیم کمک کنیم. دقیقا چه چیزی می خواستید نصب کنید؟ چه کارهایی انجام دادید؟ تا کجا پیش رفته اید؟

ارادتمند

[torkidatir]

با سلام مجدد
بنده هر کدی که تو این کتاب بود که خیال کردم مفیده رو تو پوتی زدم
لینک دانلود (http://dl.parsbook.org/server3/uploads/nasb-config-server-linux.zip)
بعد این کد ها که از سایت آقای احمد چوپانی گرفتم زدم

################################################## #########
################IBSng Installtion Help #####################
##By Ahmad Choopani , ####
##www.achoopani.ir , achoopani.com , forum.achoopani.ir ####
##################Happy New Year ####
################################################## ##########

You'll Install this addons before you starting

yum install httpd postgresql postgresql-server postgresql-python php perl -y

this proccess take a while ....
then

you will stop selinux and security level!

command >>> setup



OK!!!

You'll Download IBSng File From SourceFroge Or My Official WebSite:

this Link : >>
http://space.dl.sourceforge.net/project/ibs/IBSng/IBSng-A1.24/IBSng-A1.24.tar.bz2

http://achoopani.ir/dl/ibs/IBSng-A1.24.tar.bz2


with this command : >>

wget http://space.dl.sourceforge.net/project/ibs/IBSng/IBSng-A1.24/IBSng-A1.24.tar.bz2

after download you will extract on /usr/local with this command >>>

tar -xvjf IBSng-A1.24.tar.bz2 -C /usr/local


after exteract you will edit Postgresql configure File >>
nano /var/lib/pgsql/data/pg_hba.conf

if the file is empty you dont start postgresql service !!! >> command This >> service postgresql start


then retry >> nano /var/lib/pgsql/data/pg_hba.conf

put this link top of the file >>

local IBSng ibs trust


save and exit File!!!

you will reload postgresql service >> service postgresql restart


Ok!!
You will Create Database >>

su - postgres

$createdb IBSng

$createuser ibs

$createlang plpgsql IBSng

exit for exiting ... :d

after create db you will run setup script !
This Command >>>> /./usr/local/IBSng/scripts/setup.py

put this number to install successful

These are options you should choose if you want an typical install.


1 Install

2 Test DB Connection and Continue

2 Compile Configuration and Continue

1 Import Tables and Continue

Enter System password

1 Copy ibs.conf to '/etc/httpd/conf.d'

2 Chown apache directories to 'apache'

5 Continue

1 Copy logrotate Conf to /etc/logrotate.d

3 Continue

1 Copy Redhat init file to /etc/init.d

2 Set IBSng to start on reboot

b Back to main menu

x Exit


None of above stages should report ERROR on log history.


Ops!! Install Success !!

Put this command >> service httpd reload , service postgresql restart and service IBSng start !!


You can access On IBSNG
http://server_ip_address/IBSng/admin



user: system
pass: your passwd on installtion step entered!


If your Password Forgeted Or Not Work You will Run setup.py script and installing ....
Ahmad Choopani , 2 April 2011 , 02:45 PM!!

choopani.a@gmail.com
fourm.achoopani.ir
achoopani.ir
achoopani.com

Happy New Year ,



بعد این کد ها از هم همین سایت گرفتم زدم


Install IBSng ( CentOS 5.5 x64 ) for ***

ابتدا می بایست پکیجهای زیر روی سرور نصب بشه

yum install postgresql-server
yum install postgresql-python
yum install php-gd
yum install php-mbstring
yum install php-pdo
yum install httpd
yum install php
yum install ppp
yum install kernel
yum install nano
yum install mod_python php httpd-manual system-config-httpd httpd webalizer mud_perl perl-DBD-pg mod_ssl postgresql-libs apr-util dovecot



دانلود کردن IBSng

wget http://voxel.dl.sourceforge.net/project/ibs/IBSng/IBSng-A1.24/IBSng-A1.24.tar.bz2




extract کردن آن

tar -xvjf IBSng-A1.24.tar.bz2 -C /usr/local


ویرایش فایل pg_hba.conf

service postgresql start

nano /var/lib/pgsql/data/pg_hba.conf

اضافه کردن متن زیر در خط اول فایل
local IBSng ibs trust

Ctrl+x = save

service postgresql restart


ساخت یوزر و دیتا بیس

su - postgres
createuser ibs
createdb IBSng
createlang plpgsql IBSng
logout


نصب IBSng

service httpd start

/usr/local/IBSng/scripts/setup.py


1>2>2>1>enter pass admin>1>2>5>1>3>1>2>b>x

1 Install
2 Test DB Connection and Continue
2 Compile Configuration and Continue
1 Import Tables and Continue
Enter System password
1 Copy ibs.conf to '/etc/httpd/conf.d'
2 Chown apache directories to 'apache'
5 Countinue
1 Copy Redhat init file to /etc/init.d
3
1
2 Set IBSng to start on reboot
b Back to main menu
x Exit

service httpd reload
service IBSng start
login to IBSng ip/IBSng/admin
user : system
pass : enter pass admin or setup


install pptpd

rpm -ivh http://acelnmp.googlecode.com/files/pptpd-1.3.4-1.rhel5.1.x86_64.rpm


نصب radiusclient

rpm –ivh ftp://ftp.pbone.net/mirror/ftp.freshrpms.net/pub/freshrpms/pub/dag/redhat/el5/en/x86_64/dries/RPMS/radiusclient-0.3.2-0.2.el5.rf.x86_64.rpm


اگر این لینک از بین رفته بود میتونین از این سایت لینک جدید فایل رو پیدا کنید

http://rpm.pbone.net/index.php3/stat/4/idpl/12085792/dir/redhat_el_5/com/radiusclient-0.3.2-0.2.el5.rf.x86_64.rpm.html



حالا میرسیم به کانفیگ فایل ها

nano /etc/radiusclient/dictionary.microsoft


محتوای فایل می بایست این باشه

VENDOR Microsoft 311
ATTRIBUTE MS-CHAP-Response 1 string Microsoft
ATTRIBUTE MS-CHAP-Error 2 string Microsoft
ATTRIBUTE MS-CHAP-CPW-1 3 string Microsoft
ATTRIBUTE MS-CHAP-CPW-2 4 string Microsoft
ATTRIBUTE MS-CHAP-LM-Enc-PW 5 string Microsoft
ATTRIBUTE MS-CHAP-NT-Enc-PW 6 string Microsoft
ATTRIBUTE MS-MPPE-Encryption-Policy 7 string Microsoft
# This is referred to as both singular and plural in the RFC.
# Plural seems to make more sense.
ATTRIBUTE MS-MPPE-Encryption-Type 8 string Microsoft
ATTRIBUTE MS-MPPE-Encryption-Types 8 string Microsoft
ATTRIBUTE MS-RAS-Vendor 9 integer Microsoft # content is Vendor-ID
ATTRIBUTE MS-CHAP-Domain 10 string Microsoft
ATTRIBUTE MS-CHAP-Challenge 11 string Microsoft
ATTRIBUTE MS-CHAP-MPPE-Keys 12 string Microsoft
ATTRIBUTE MS-BAP-Usage 13 integer Microsoft
ATTRIBUTE MS-Link-Utilization-Threshold 14 integer Microsoft # values are 1-100
ATTRIBUTE MS-Link-Drop-Time-Limit 15 integer Microsoft
ATTRIBUTE MS-MPPE-Send-Key 16 string Microsoft
ATTRIBUTE MS-MPPE-Recv-Key 17 string Microsoft
ATTRIBUTE MS-RAS-Version 18 string Microsoft
ATTRIBUTE MS-Old-ARAP-Password 19 string Microsoft
ATTRIBUTE MS-New-ARAP-Password 20 string Microsoft
ATTRIBUTE MS-ARAP-PW-Change-Reason 21 integer Microsoft

ATTRIBUTE MS-Filter 22 string Microsoft
ATTRIBUTE MS-Acct-Auth-Type 23 integer Microsoft
ATTRIBUTE MS-Acct-EAP-Type 24 integer Microsoft

ATTRIBUTE MS-CHAP2-Response 25 string Microsoft
ATTRIBUTE MS-CHAP2-Success 26 string Microsoft
ATTRIBUTE MS-CHAP2-CPW 27 string Microsoft

ATTRIBUTE MS-Primary-DNS-Server 28 ipaddr Microsoft
ATTRIBUTE MS-Secondary-DNS-Server 29 ipaddr Microsoft
ATTRIBUTE MS-Primary-NBNS-Server 30 ipaddr Microsoft
ATTRIBUTE MS-Secondary-NBNS-Server 31 ipaddr Microsoft

#ATTRIBUTE MS-ARAP-Challenge 33 string Microsoft

#
# Integer Translations
#

# MS-BAP-Usage Values

VALUE MS-BAP-Usage Not-Allowed 0
VALUE MS-BAP-Usage Allowed 1
VALUE MS-BAP-Usage Required 2

# MS-ARAP-Password-Change-Reason Values

VALUE MS-ARAP-PW-Change-Reason Just-Change-Password 1
VALUE MS-ARAP-PW-Change-Reason Expired-Password 2
VALUE MS-ARAP-PW-Change-Reason Admin-Requires-Password-Change 3
VALUE MS-ARAP-PW-Change-Reason Password-Too-Short 4

# MS-Acct-Auth-Type Values

VALUE MS-Acct-Auth-Type PAP 1
VALUE MS-Acct-Auth-Type CHAP 2
VALUE MS-Acct-Auth-Type MS-CHAP-1 3
VALUE MS-Acct-Auth-Type MS-CHAP-2 4
VALUE MS-Acct-Auth-Type EAP 5

# MS-Acct-EAP-Type Values

VALUE MS-Acct-EAP-Type MD5 4
VALUE MS-Acct-EAP-Type OTP 5
VALUE MS-Acct-EAP-Type Generic-Token-Card 6
VALUE MS-Acct-EAP-Type TLS 13



فایل های بعدی هم به همین صورت

nano /etc/radiusclient/radiusclient.conf

auth_order radius,local
login_tries 4
login_timeout 60
nologin /etc/nologin
issue /etc/radiusclient/issue
authserver localhost:1812
acctserver localhost:1813
servers /etc/radiusclient/servers
dictionary /etc/radiusclient/dictionary
login_radius /usr/sbin/login.radius
seqfile /var/run/radius.seq
mapfile /etc/radiusclient/port-id-map
default_realm
radius_timeout 10
radius_retries 3
login_local /bin/login
ویرایش فایل dictionary

nano /etc/radiusclient/dictionary

#
# Updated 97/06/13 to livingston-radius-2.01 miquels@cistron.nl
#
# This file contains dictionary translations for parsing
# requests and generating responses. All transactions are
# composed of Attribute/Value Pairs. The value of each attribute
# is specified as one of 4 data types. Valid data types are:
#
# string - 0-253 octets
# ipaddr - 4 octets in network byte order
# integer - 32 bit value in big endian order (high byte first)
# date - 32 bit value in big endian order - seconds since
# 00:00:00 GMT, Jan. 1, 1970
#
# Enumerated values are stored in the user file with dictionary
# VALUE translations for easy administration.
#
# Example:
#
# ATTRIBUTE VALUE
# --------------- -----
# Framed-Protocol = PPP
# 7 = 1 (integer encoding)
#

#
# Following are the proper new names. Use these.
#
ATTRIBUTE User-Name 1 string
ATTRIBUTE Password 2 string
ATTRIBUTE CHAP-Password 3 string
ATTRIBUTE NAS-IP-Address 4 ipaddr
ATTRIBUTE NAS-Port-Id 5 integer
ATTRIBUTE Service-Type 6 integer
ATTRIBUTE Framed-Protocol 7 integer
ATTRIBUTE Framed-IP-Address 8 ipaddr
ATTRIBUTE Framed-IP-Netmask 9 ipaddr
ATTRIBUTE Framed-Routing 10 integer
ATTRIBUTE Filter-Id 11 string
ATTRIBUTE Framed-MTU 12 integer
ATTRIBUTE Framed-Compression 13 integer
ATTRIBUTE Login-IP-Host 14 ipaddr
ATTRIBUTE Login-Service 15 integer
ATTRIBUTE Login-TCP-Port 16 integer
ATTRIBUTE Reply-Message 18 string
ATTRIBUTE Callback-Number 19 string
ATTRIBUTE Callback-Id 20 string
ATTRIBUTE Framed-Route 22 string
ATTRIBUTE Framed-IPX-Network 23 ipaddr
ATTRIBUTE State 24 string
ATTRIBUTE Session-Timeout 27 integer
ATTRIBUTE Idle-Timeout 28 integer
ATTRIBUTE Termination-Action 29 integer
ATTRIBUTE Called-Station-Id 30 string
ATTRIBUTE Calling-Station-Id 31 string
ATTRIBUTE Acct-Status-Type 40 integer
ATTRIBUTE Acct-Delay-Time 41 integer
ATTRIBUTE Acct-Input-Octets 42 integer
ATTRIBUTE Acct-Output-Octets 43 integer
ATTRIBUTE Acct-Session-Id 44 string
ATTRIBUTE Acct-Authentic 45 integer
ATTRIBUTE Acct-Session-Time 46 integer
ATTRIBUTE Acct-Terminate-Cause 49 integer
ATTRIBUTE NAS-Port-Type 61 integer
ATTRIBUTE Port-Limit 62 integer
ATTRIBUTE Connect-Info 77 string

#
# Experimental Non Protocol Attributes used by Cistron-Radiusd
#
ATTRIBUTE Huntgroup-Name 221 string
ATTRIBUTE User-Category 1029 string
ATTRIBUTE Group-Name 1030 string
ATTRIBUTE Simultaneous-Use 1034 integer
ATTRIBUTE Strip-User-Name 1035 integer
ATTRIBUTE Fall-Through 1036 integer
ATTRIBUTE Add-Port-To-IP-Address 1037 integer
ATTRIBUTE Exec-Program 1038 string
ATTRIBUTE Exec-Program-Wait 1039 string
ATTRIBUTE Hint 1040 string

#
# Non-Protocol Attributes
# These attributes are used internally by the server
#
ATTRIBUTE Expiration 21 date
ATTRIBUTE Auth-Type 1000 integer
ATTRIBUTE Menu 1001 string
ATTRIBUTE Termination-Menu 1002 string
ATTRIBUTE Prefix 1003 string
ATTRIBUTE Suffix 1004 string
ATTRIBUTE Group 1005 string
ATTRIBUTE Crypt-Password 1006 string
ATTRIBUTE Connect-Rate 1007 integer

#
# Integer Translations
#

# User Types

VALUE Service-Type Login-User 1
VALUE Service-Type Framed-User 2
VALUE Service-Type Callback-Login-User 3
VALUE Service-Type Callback-Framed-User 4
VALUE Service-Type Outbound-User 5
VALUE Service-Type Administrative-User 6
VALUE Service-Type NAS-Prompt-User 7

# Framed Protocols

VALUE Framed-Protocol PPP 1
VALUE Framed-Protocol SLIP 2

# Framed Routing Values

VALUE Framed-Routing None 0
VALUE Framed-Routing Broadcast 1
VALUE Framed-Routing Listen 2
VALUE Framed-Routing Broadcast-Listen 3

# Framed Compression Types

VALUE Framed-Compression None 0
VALUE Framed-Compression Van-Jacobson-TCP-IP 1

# Login Services

VALUE Login-Service Telnet 0
VALUE Login-Service Rlogin 1
VALUE Login-Service TCP-Clear 2
VALUE Login-Service PortMaster 3

# Status Types

VALUE Acct-Status-Type Start 1
VALUE Acct-Status-Type Stop 2
VALUE Acct-Status-Type Accounting-On 7
VALUE Acct-Status-Type Accounting-Off 8

# Authentication Types

VALUE Acct-Authentic RADIUS 1
VALUE Acct-Authentic Local 2
VALUE Acct-Authentic PowerLink128 100

# Termination Options

VALUE Termination-Action Default 0
VALUE Termination-Action RADIUS-Request 1

# NAS Port Types, available in 3.3.1 and later

VALUE NAS-Port-Type Async 0
VALUE NAS-Port-Type Sync 1
VALUE NAS-Port-Type ISDN 2
VALUE NAS-Port-Type ISDN-V120 3
VALUE NAS-Port-Type ISDN-V110 4

# Acct Terminate Causes, available in 3.3.2 and later

VALUE Acct-Terminate-Cause User-Request 1
VALUE Acct-Terminate-Cause Lost-Carrier 2
VALUE Acct-Terminate-Cause Lost-Service 3
VALUE Acct-Terminate-Cause Idle-Timeout 4
VALUE Acct-Terminate-Cause Session-Timeout 5
VALUE Acct-Terminate-Cause Admin-Reset 6
VALUE Acct-Terminate-Cause Admin-Reboot 7
VALUE Acct-Terminate-Cause Port-Error 8
VALUE Acct-Terminate-Cause NAS-Error 9
VALUE Acct-Terminate-Cause NAS-Request 10
VALUE Acct-Terminate-Cause NAS-Reboot 11
VALUE Acct-Terminate-Cause Port-Unneeded 12
VALUE Acct-Terminate-Cause Port-Preempted 13
VALUE Acct-Terminate-Cause Port-Suspended 14
VALUE Acct-Terminate-Cause Service-Unavailable 15
VALUE Acct-Terminate-Cause Callback 16
VALUE Acct-Terminate-Cause User-Error 17
VALUE Acct-Terminate-Cause Host-Request 18

#
# Non-Protocol Integer Translations
#

VALUE Auth-Type Local 0
VALUE Auth-Type System 1
VALUE Auth-Type SecurID 2
VALUE Auth-Type Crypt-Local 3
VALUE Auth-Type Reject 4

#
# Cistron extensions
#
VALUE Auth-Type Pam 253
VALUE Auth-Type None 254

#
# Experimental Non-Protocol Integer Translations for Cistron-Radiusd
#
VALUE Fall-Through No 0
VALUE Fall-Through Yes 1
VALUE Add-Port-To-IP-Address No 0
VALUE Add-Port-To-IP-Address Yes 1

#
# Configuration Values
# uncomment these two lines to turn account expiration on
#

#VALUE Server-Config Password-Expiration 30
#VALUE Server-Config Password-Warning 5

INCLUDE /etc/radiusclient/dictionary.microsoft
ویرایش فایل sysctl.conf

nano /etc/sysctl.conf

# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.

# Controls IP packet forwarding
net.ipv4.ip_forward = 1

# Controls source route verification
# net.ipv4.conf.default.rp_filter = 1

# Do not accept source routing
# net.ipv4.conf.default.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel
# kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
# kernel.core_uses_pid = 1

# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1

# Controls the maximum size of a message, in bytes
# kernel.msgmnb = 65536

# Controls the default maxmimum size of a mesage queue
# kernel.msgmax = 65536

# Controls the maximum shared segment size, in bytes
# kernel.shmmax = 4294967295

# Controls the maximum number of shared memory segments, in pages
# kernel.shmall = 268435456
ویرایش فایل options.pptpd

nano /etc/ppp/options.pptpd

lock
debug
name pptpd
*****arp
nobsdcomp
nodeflate

#+mschap
#-chap
#-pap
+mschap-v2
require-mppe-128

ms-dns 4.2.2.4
plugin radius.so
lcp-echo-interval 20
lcp-echo-failure 6
nologfd

#mtu 1496
#nomppe-lower-mtu
#connect-delay 5000
ویرایش فایل pptpd.conf

nano /etc/pptpd.conf

################################################## #############################
# $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $
#
# Sample Poptop configuration file /etc/pptpd.conf
#
# Changes are effective when pptpd is restarted.
################################################## #############################

# TAG: ppp
# Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
#ppp /usr/sbin/pppd

# TAG: option
# Specifies the location of the PPP options file.
# By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd
logwtmp
localip 192.168.0.1
remoteip 192.168.10.100-200
# TAG: debug
# Turns on (more) debugging to syslog
#
#debug

# TAG: stimeout
# Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10

# TAG: noipparam
# Suppress the passing of the client's IP address to PPP, which is
# done by default otherwise.
#
#noipparam

# TAG: logwtmp
# Use wtmp(5) to record client connections and disconnections.
#

# TAG: bcrelay <if>
# Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1

# TAG: delegate
# Delegates the allocation of client IP addresses to pppd.
#
# Without this option, which is the default, pptpd manages the list of
# IP addresses for clients and passes the next free address to pppd.
# With this option, pptpd does not pass an address, and so pppd may use
# radius or chap-secrets to allocate an address.
#
#delegate

# TAG: connections
# Limits the number of client connections that may be accepted.
#
# If pptpd is allocating IP addresses (e.g. delegate is not
# used) then the number of connections is also limited by the
# remoteip option. The default is 100.
#connections 100

# TAG: localip
# TAG: remoteip
# Specifies the local and remote IP address ranges.
#
# These options are ignored if delegate option is set.
#
# Any addresses work as long as the local machine takes care of the
# routing. But if you want to use MS-Windows networking, you should
# use IP addresses out of the LAN address space and use the *****arp
# option in the pppd options file, or run bcrelay.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than the value of connections,
# it will start at the beginning of the list and go until it
# gets connections IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
# (Recommended)

ویرایش فایل ip-up

nano /etc/ppp/ip-up

#!/bin/bash
# This file should not be modified -- make local changes to
# /etc/ppp/ip-up.local instead

PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH

LOGDEVICE=$6
REALDEVICE=$1

[ -f /etc/sysconfig/network-scripts/ifcfg-${LOGDEVICE} ] && /etc/sysconfig/network-scripts/ifup-post --realdevice ${REALDEVICE} ifcfg-${LOGDEVICE}

/etc/ppp/ip-up.ipv6to4 ${LOGDEVICE}

[ -x /etc/ppp/ip-up.local ] && /etc/ppp/ip-up.local "$@"

exit 0
/sbin/ifconfig $1 mtu 1400

و اما ویرایش این فایل زمانی که می خوان RAS تعریف کنید تو IBSng این به کارتون میاد
…radius secret

nano /etc/radiusclient/servers


127.0.0.1 jalal3643667



اجرا کردن چند تا دستور ....

sysctl -p
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A INPUT -i eth0 -p tcp --dport 1723 -j ACCEPT
iptables -A INPUT -i eth0 -p gre -j ACCEPT
iptables -A FORWARD -i ppp+ -o eth0 -j ACCEPT
iptables -A FORWARD -i eth0 -o ppp+ -j ACCEPT
/sbin/service iptables save



این هم برای اینه که سرور ریستارت شد سرویس ها start بشه

chkconfig pptpd on
chkconfig httpd on
chkconfig postgresql on
----------------
service postgresql restart
service pptpd restart
service httpd reload
service IBSng start

تمام بقیشم میرید تو IBS یه شارژ تعریف میکنید یه RAS بعد GROUP تمام شد رفت به همین راحتی (



Install IBSng ( CentOS 5.5 x64 ) for ***

ابتدا می بایست پکیجهای زیر روی سرور نصب بشه
yum install postgresql-server
yum install postgresql-python
yum install php-gd
yum install php-mbstring
yum install php-pdo
yum install httpd
yum install php
yum install ppp
yum install kernel
yum install nano
yum install mod_python php httpd-manual system-config-httpd httpd webalizer mud_perl perl-DBD-pg mod_ssl postgresql-libs apr-util dovecot


دانلود کردن IBSng
wget http://voxel.dl.sourceforge.net/project/ibs/IBSng/IBSng-A1.24/IBSng-A1.24.tar.bz2



extract کردن آن
tar -xvjf IBSng-A1.24.tar.bz2 -C /usr/local

ویرایش فایل pg_hba.conf
service postgresql start

nano /var/lib/pgsql/data/pg_hba.conf

اضافه کردن متن زیر در خط اول فایل
local IBSng ibs trust

Ctrl+x = save

service postgresql restart

ساخت یوزر و دیتا بیس
su - postgres
createuser ibs
createdb IBSng
createlang plpgsql IBSng
logout

نصب IBSng
service httpd start

/usr/local/IBSng/scripts/setup.py


1>2>2>1>enter pass admin>1>2>5>1>3>1>2>b>x

1 Install
2 Test DB Connection and Continue
2 Compile Configuration and Continue
1 Import Tables and Continue
Enter System password
1 Copy ibs.conf to '/etc/httpd/conf.d'
2 Chown apache directories to 'apache'
5 Countinue
1 Copy Redhat init file to /etc/init.d
3
1
2 Set IBSng to start on reboot
b Back to main menu
x Exit

service httpd reload
service IBSng start
login to IBSng ip/IBSng/admin
user : system
pass : enter pass admin or setup

install pptpd
rpm -ivh http://acelnmp.googlecode.com/files/pptpd-1.3.4-1.rhel5.1.x86_64.rpm

نصب radiusclient
rpm –ivh ftp://ftp.pbone.net/mirror/ftp.freshrpms.net/pub/freshrpms/pub/dag/redhat/el5/en/x86_64/dries/RPMS/radiusclient-0.3.2-0.2.el5.rf.x86_64.rpm

اگر این لینک از بین رفته بود میتونین از این سایت لینک جدید فایل رو پیدا کنید
http://rpm.pbone.net/index.php3/stat/4/idpl/12085792/dir/redhat_el_5/com/radiusclient-0.3.2-0.2.el5.rf.x86_64.rpm.html


حالا میرسیم به کانفیگ فایل ها
nano /etc/radiusclient/dictionary.microsoft

محتوای فایل می بایست این باشه
VENDOR Microsoft 311
ATTRIBUTE MS-CHAP-Response 1 string Microsoft
ATTRIBUTE MS-CHAP-Error 2 string Microsoft
ATTRIBUTE MS-CHAP-CPW-1 3 string Microsoft
ATTRIBUTE MS-CHAP-CPW-2 4 string Microsoft
ATTRIBUTE MS-CHAP-LM-Enc-PW 5 string Microsoft
ATTRIBUTE MS-CHAP-NT-Enc-PW 6 string Microsoft
ATTRIBUTE MS-MPPE-Encryption-Policy 7 string Microsoft
# This is referred to as both singular and plural in the RFC.
# Plural seems to make more sense.
ATTRIBUTE MS-MPPE-Encryption-Type 8 string Microsoft
ATTRIBUTE MS-MPPE-Encryption-Types 8 string Microsoft
ATTRIBUTE MS-RAS-Vendor 9 integer Microsoft # content is Vendor-ID
ATTRIBUTE MS-CHAP-Domain 10 string Microsoft
ATTRIBUTE MS-CHAP-Challenge 11 string Microsoft
ATTRIBUTE MS-CHAP-MPPE-Keys 12 string Microsoft
ATTRIBUTE MS-BAP-Usage 13 integer Microsoft
ATTRIBUTE MS-Link-Utilization-Threshold 14 integer Microsoft # values are 1-100
ATTRIBUTE MS-Link-Drop-Time-Limit 15 integer Microsoft
ATTRIBUTE MS-MPPE-Send-Key 16 string Microsoft
ATTRIBUTE MS-MPPE-Recv-Key 17 string Microsoft
ATTRIBUTE MS-RAS-Version 18 string Microsoft
ATTRIBUTE MS-Old-ARAP-Password 19 string Microsoft
ATTRIBUTE MS-New-ARAP-Password 20 string Microsoft
ATTRIBUTE MS-ARAP-PW-Change-Reason 21 integer Microsoft

ATTRIBUTE MS-Filter 22 string Microsoft
ATTRIBUTE MS-Acct-Auth-Type 23 integer Microsoft
ATTRIBUTE MS-Acct-EAP-Type 24 integer Microsoft

ATTRIBUTE MS-CHAP2-Response 25 string Microsoft
ATTRIBUTE MS-CHAP2-Success 26 string Microsoft
ATTRIBUTE MS-CHAP2-CPW 27 string Microsoft

ATTRIBUTE MS-Primary-DNS-Server 28 ipaddr Microsoft
ATTRIBUTE MS-Secondary-DNS-Server 29 ipaddr Microsoft
ATTRIBUTE MS-Primary-NBNS-Server 30 ipaddr Microsoft
ATTRIBUTE MS-Secondary-NBNS-Server 31 ipaddr Microsoft

#ATTRIBUTE MS-ARAP-Challenge 33 string Microsoft

#
# Integer Translations
#

# MS-BAP-Usage Values

VALUE MS-BAP-Usage Not-Allowed 0
VALUE MS-BAP-Usage Allowed 1
VALUE MS-BAP-Usage Required 2

# MS-ARAP-Password-Change-Reason Values

VALUE MS-ARAP-PW-Change-Reason Just-Change-Password 1
VALUE MS-ARAP-PW-Change-Reason Expired-Password 2
VALUE MS-ARAP-PW-Change-Reason Admin-Requires-Password-Change 3
VALUE MS-ARAP-PW-Change-Reason Password-Too-Short 4

# MS-Acct-Auth-Type Values

VALUE MS-Acct-Auth-Type PAP 1
VALUE MS-Acct-Auth-Type CHAP 2
VALUE MS-Acct-Auth-Type MS-CHAP-1 3
VALUE MS-Acct-Auth-Type MS-CHAP-2 4
VALUE MS-Acct-Auth-Type EAP 5

# MS-Acct-EAP-Type Values

VALUE MS-Acct-EAP-Type MD5 4
VALUE MS-Acct-EAP-Type OTP 5
VALUE MS-Acct-EAP-Type Generic-Token-Card 6
VALUE MS-Acct-EAP-Type TLS 13


فایل های بعدی هم به همین صورت
nano /etc/radiusclient/radiusclient.conf

auth_order radius,local
login_tries 4
login_timeout 60
nologin /etc/nologin
issue /etc/radiusclient/issue
authserver localhost:1812
acctserver localhost:1813
servers /etc/radiusclient/servers
dictionary /etc/radiusclient/dictionary
login_radius /usr/sbin/login.radius
seqfile /var/run/radius.seq
mapfile /etc/radiusclient/port-id-map
default_realm
radius_timeout 10
radius_retries 3
login_local /bin/login





ویرایش فایل dictionary

nano /etc/radiusclient/dictionary

#
# Updated 97/06/13 to livingston-radius-2.01 miquels@cistron.nl
#
# This file contains dictionary translations for parsing
# requests and generating responses. All transactions are
# composed of Attribute/Value Pairs. The value of each attribute
# is specified as one of 4 data types. Valid data types are:
#
# string - 0-253 octets
# ipaddr - 4 octets in network byte order
# integer - 32 bit value in big endian order (high byte first)
# date - 32 bit value in big endian order - seconds since
# 00:00:00 GMT, Jan. 1, 1970
#
# Enumerated values are stored in the user file with dictionary
# VALUE translations for easy administration.
#
# Example:
#
# ATTRIBUTE VALUE
# --------------- -----
# Framed-Protocol = PPP
# 7 = 1 (integer encoding)
#

#
# Following are the proper new names. Use these.
#
ATTRIBUTE User-Name 1 string
ATTRIBUTE Password 2 string
ATTRIBUTE CHAP-Password 3 string
ATTRIBUTE NAS-IP-Address 4 ipaddr
ATTRIBUTE NAS-Port-Id 5 integer
ATTRIBUTE Service-Type 6 integer
ATTRIBUTE Framed-Protocol 7 integer
ATTRIBUTE Framed-IP-Address 8 ipaddr
ATTRIBUTE Framed-IP-Netmask 9 ipaddr
ATTRIBUTE Framed-Routing 10 integer
ATTRIBUTE Filter-Id 11 string
ATTRIBUTE Framed-MTU 12 integer
ATTRIBUTE Framed-Compression 13 integer
ATTRIBUTE Login-IP-Host 14 ipaddr
ATTRIBUTE Login-Service 15 integer
ATTRIBUTE Login-TCP-Port 16 integer
ATTRIBUTE Reply-Message 18 string
ATTRIBUTE Callback-Number 19 string
ATTRIBUTE Callback-Id 20 string
ATTRIBUTE Framed-Route 22 string
ATTRIBUTE Framed-IPX-Network 23 ipaddr
ATTRIBUTE State 24 string
ATTRIBUTE Session-Timeout 27 integer
ATTRIBUTE Idle-Timeout 28 integer
ATTRIBUTE Termination-Action 29 integer
ATTRIBUTE Called-Station-Id 30 string
ATTRIBUTE Calling-Station-Id 31 string
ATTRIBUTE Acct-Status-Type 40 integer
ATTRIBUTE Acct-Delay-Time 41 integer
ATTRIBUTE Acct-Input-Octets 42 integer
ATTRIBUTE Acct-Output-Octets 43 integer
ATTRIBUTE Acct-Session-Id 44 string
ATTRIBUTE Acct-Authentic 45 integer
ATTRIBUTE Acct-Session-Time 46 integer
ATTRIBUTE Acct-Terminate-Cause 49 integer
ATTRIBUTE NAS-Port-Type 61 integer
ATTRIBUTE Port-Limit 62 integer
ATTRIBUTE Connect-Info 77 string

#
# Experimental Non Protocol Attributes used by Cistron-Radiusd
#
ATTRIBUTE Huntgroup-Name 221 string
ATTRIBUTE User-Category 1029 string
ATTRIBUTE Group-Name 1030 string
ATTRIBUTE Simultaneous-Use 1034 integer
ATTRIBUTE Strip-User-Name 1035 integer
ATTRIBUTE Fall-Through 1036 integer
ATTRIBUTE Add-Port-To-IP-Address 1037 integer
ATTRIBUTE Exec-Program 1038 string
ATTRIBUTE Exec-Program-Wait 1039 string
ATTRIBUTE Hint 1040 string

#
# Non-Protocol Attributes
# These attributes are used internally by the server
#
ATTRIBUTE Expiration 21 date
ATTRIBUTE Auth-Type 1000 integer
ATTRIBUTE Menu 1001 string
ATTRIBUTE Termination-Menu 1002 string
ATTRIBUTE Prefix 1003 string
ATTRIBUTE Suffix 1004 string
ATTRIBUTE Group 1005 string
ATTRIBUTE Crypt-Password 1006 string
ATTRIBUTE Connect-Rate 1007 integer

#
# Integer Translations
#

# User Types

VALUE Service-Type Login-User 1
VALUE Service-Type Framed-User 2
VALUE Service-Type Callback-Login-User 3
VALUE Service-Type Callback-Framed-User 4
VALUE Service-Type Outbound-User 5
VALUE Service-Type Administrative-User 6
VALUE Service-Type NAS-Prompt-User 7

# Framed Protocols

VALUE Framed-Protocol PPP 1
VALUE Framed-Protocol SLIP 2

# Framed Routing Values

VALUE Framed-Routing None 0
VALUE Framed-Routing Broadcast 1
VALUE Framed-Routing Listen 2
VALUE Framed-Routing Broadcast-Listen 3

# Framed Compression Types

VALUE Framed-Compression None 0
VALUE Framed-Compression Van-Jacobson-TCP-IP 1

# Login Services

VALUE Login-Service Telnet 0
VALUE Login-Service Rlogin 1
VALUE Login-Service TCP-Clear 2
VALUE Login-Service PortMaster 3

# Status Types

VALUE Acct-Status-Type Start 1
VALUE Acct-Status-Type Stop 2
VALUE Acct-Status-Type Accounting-On 7
VALUE Acct-Status-Type Accounting-Off 8

# Authentication Types

VALUE Acct-Authentic RADIUS 1
VALUE Acct-Authentic Local 2
VALUE Acct-Authentic PowerLink128 100

# Termination Options

VALUE Termination-Action Default 0
VALUE Termination-Action RADIUS-Request 1

# NAS Port Types, available in 3.3.1 and later

VALUE NAS-Port-Type Async 0
VALUE NAS-Port-Type Sync 1
VALUE NAS-Port-Type ISDN 2
VALUE NAS-Port-Type ISDN-V120 3
VALUE NAS-Port-Type ISDN-V110 4

# Acct Terminate Causes, available in 3.3.2 and later

VALUE Acct-Terminate-Cause User-Request 1
VALUE Acct-Terminate-Cause Lost-Carrier 2
VALUE Acct-Terminate-Cause Lost-Service 3
VALUE Acct-Terminate-Cause Idle-Timeout 4
VALUE Acct-Terminate-Cause Session-Timeout 5
VALUE Acct-Terminate-Cause Admin-Reset 6
VALUE Acct-Terminate-Cause Admin-Reboot 7
VALUE Acct-Terminate-Cause Port-Error 8
VALUE Acct-Terminate-Cause NAS-Error 9
VALUE Acct-Terminate-Cause NAS-Request 10
VALUE Acct-Terminate-Cause NAS-Reboot 11
VALUE Acct-Terminate-Cause Port-Unneeded 12
VALUE Acct-Terminate-Cause Port-Preempted 13
VALUE Acct-Terminate-Cause Port-Suspended 14
VALUE Acct-Terminate-Cause Service-Unavailable 15
VALUE Acct-Terminate-Cause Callback 16
VALUE Acct-Terminate-Cause User-Error 17
VALUE Acct-Terminate-Cause Host-Request 18

#
# Non-Protocol Integer Translations
#

VALUE Auth-Type Local 0
VALUE Auth-Type System 1
VALUE Auth-Type SecurID 2
VALUE Auth-Type Crypt-Local 3
VALUE Auth-Type Reject 4

#
# Cistron extensions
#
VALUE Auth-Type Pam 253
VALUE Auth-Type None 254

#
# Experimental Non-Protocol Integer Translations for Cistron-Radiusd
#
VALUE Fall-Through No 0
VALUE Fall-Through Yes 1
VALUE Add-Port-To-IP-Address No 0
VALUE Add-Port-To-IP-Address Yes 1

#
# Configuration Values
# uncomment these two lines to turn account expiration on
#

#VALUE Server-Config Password-Expiration 30
#VALUE Server-Config Password-Warning 5

INCLUDE /etc/radiusclient/dictionary.microsoft

ویرایش فایل sysctl.conf

nano /etc/sysctl.conf

# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.

# Controls IP packet forwarding
net.ipv4.ip_forward = 1

# Controls source route verification
# net.ipv4.conf.default.rp_filter = 1

# Do not accept source routing
# net.ipv4.conf.default.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel
# kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
# kernel.core_uses_pid = 1

# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1

# Controls the maximum size of a message, in bytes
# kernel.msgmnb = 65536

# Controls the default maxmimum size of a mesage queue
# kernel.msgmax = 65536

# Controls the maximum shared segment size, in bytes
# kernel.shmmax = 4294967295

# Controls the maximum number of shared memory segments, in pages
# kernel.shmall = 268435456



ویرایش فایل options.pptpd
nano /etc/ppp/options.pptpd

lock
debug
name pptpd
*****arp
nobsdcomp
nodeflate

#+mschap
#-chap
#-pap
+mschap-v2
require-mppe-128

ms-dns 4.2.2.4
plugin radius.so
lcp-echo-interval 20
lcp-echo-failure 6
nologfd

#mtu 1496
#nomppe-lower-mtu
#connect-delay 5000




ویرایش فایل pptpd.conf

nano /etc/pptpd.conf

################################################## #############################
# $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $
#
# Sample Poptop configuration file /etc/pptpd.conf
#
# Changes are effective when pptpd is restarted.
################################################## #############################

# TAG: ppp
# Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
#ppp /usr/sbin/pppd

# TAG: option
# Specifies the location of the PPP options file.
# By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd
logwtmp
localip 192.168.0.1
remoteip 192.168.10.100-200
# TAG: debug
# Turns on (more) debugging to syslog
#
#debug

# TAG: stimeout
# Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10

# TAG: noipparam
# Suppress the passing of the client's IP address to PPP, which is
# done by default otherwise.
#
#noipparam

# TAG: logwtmp
# Use wtmp(5) to record client connections and disconnections.
#

# TAG: bcrelay <if>
# Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1

# TAG: delegate
# Delegates the allocation of client IP addresses to pppd.
#
# Without this option, which is the default, pptpd manages the list of
# IP addresses for clients and passes the next free address to pppd.
# With this option, pptpd does not pass an address, and so pppd may use
# radius or chap-secrets to allocate an address.
#
#delegate

# TAG: connections
# Limits the number of client connections that may be accepted.
#
# If pptpd is allocating IP addresses (e.g. delegate is not
# used) then the number of connections is also limited by the
# remoteip option. The default is 100.
#connections 100

# TAG: localip
# TAG: remoteip
# Specifies the local and remote IP address ranges.
#
# These options are ignored if delegate option is set.
#
# Any addresses work as long as the local machine takes care of the
# routing. But if you want to use MS-Windows networking, you should
# use IP addresses out of the LAN address space and use the *****arp
# option in the pppd options file, or run bcrelay.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than the value of connections,
# it will start at the beginning of the list and go until it
# gets connections IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
# (Recommended)




ویرایش فایل ip-up




nano /etc/ppp/ip-up

#!/bin/bash
# This file should not be modified -- make local changes to
# /etc/ppp/ip-up.local instead

PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH

LOGDEVICE=$6
REALDEVICE=$1

[ -f /etc/sysconfig/network-scripts/ifcfg-${LOGDEVICE} ] && /etc/sysconfig/network-scripts/ifup-post --realdevice ${REALDEVICE} ifcfg-${LOGDEVICE}

/etc/ppp/ip-up.ipv6to4 ${LOGDEVICE}

[ -x /etc/ppp/ip-up.local ] && /etc/ppp/ip-up.local "$@"

exit 0
/sbin/ifconfig $1 mtu 1400

و اما ویرایش این فایل زمانی که می خوان RAS تعریف کنید تو IBSng این به کارتون میاد
…radius secret
nano /etc/radiusclient/servers


127.0.0.1 jalal3643667


اجرا کردن چند تا دستور ....
sysctl -p
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A INPUT -i eth0 -p tcp --dport 1723 -j ACCEPT
iptables -A INPUT -i eth0 -p gre -j ACCEPT
iptables -A FORWARD -i ppp+ -o eth0 -j ACCEPT
iptables -A FORWARD -i eth0 -o ppp+ -j ACCEPT
/sbin/service iptables save


این هم برای اینه که سرور ریستارت شد سرویس ها start بشه
chkconfig pptpd on
chkconfig httpd on
chkconfig postgresql on
----------------
service postgresql restart
service pptpd restart
service httpd reload
service IBSng start

تمام بقیشم میرید تو IBS یه شارژ تعریف میکنید یه RAS بعد GROUP تمام شد رفت به همین راحتی (





البته همشو نزدم

با تشکر فراوان از کمک شما

[kaajhost]

با سلام
شما IBSng نصب کرده اید. اما برای سیستم وبلاگ دهی چرا ان را نصب کرده اید. شما نیازی به IBS ندارید. شما نیاز به یک کنترل پنل هاست مثل کلوکسو یا دایرکت ادمین و سی پنل دارید. اگر دسترسی کنسول به سرور خود دارید از آنجا باید ریلود سیستم عامل بدهید و بعد اقدام به نصب یکی از این کنترل پنلها کنید.

ارادتمند

[torkidatir]

سلام اگه فقط بگید چطور سرور رو ریلود کنم ممنون میشم
با تشکر فراوان

[paarandserver]

باید سرور لینوکس ریلود بشه
برای ریلود باید با پشتیبانی سرورتون تماس بگیرید. که احتمالاً مقداری هزینه داره

[esh]

دوست عزیز اگر بهتان پلن دادند می توانید سیستم عامل را دوباره نصب کنیددر غیر اینصورت باید با خودشان صحبت کنید

[torkidatir]

سلام من تو hypervm Enterprise آیکن rebuild رو دیدم فکر کنم سیستم عامل سرور رو عوض می کنه یا یکی دیگه میسازه لطفا بگید این درسته یا نه؟

بعد لطف کنید بگید که برای نصب ibsng رو سرور کدوم گزینه در rebuild بهتره 13780 البته خودش یک گزنیه به این صورت داره Centos-5-i386 IBSngولی من دست نگه داشتم لطفا بگید چکار کنم
با تشکر فراوان از همه

[mojtaba.ghadri]

سلام.
بنده از متن شما فهمیدم که یک vps لینوکس دارید که می خواهید اقدام به راه اندازی سیستم وبلاگدهی کنید.
پس ابتدا که شما vps رو rebuild میکنید , و یک سرور مجازی نو تبدیل می کنید. ( خوب یک نسخه از centos نصب میکنید , centos 6.x رو پیشنهاد می کنم.)
حالا شما به یک کنترل پنل نیاز دارید. خوب بهترین کنترل پنل های پولی cpanel و directadmin هستش که باید لیسانس آن ها رو تهیه کنید.
اما واسه شروع می تونید از کنترل پنل های رایگان نیز استفاده کنید که البته بعضی از ان ها واقعا خوب هستند. ( پیشنهاد پنل کلکسو یا وب مین )

و یک سری تنظیمات امنیتی بعد از ان باید انجام دهید.

خوب تا اینجا شما پنل ساختید و حالا یک دامنه رو روی سرور باید ست کنید.
حالا شما به یک اسکریپت وبلاگ دهی نیاز دارید ( اسکریپت خوب وبلاگدهی پولی هستش )
اما واسه شروع از وردپرس شبکه می تونید استفاده کنید هم افزونه هاش زیاده هم قالب های زیادی داره.

اگه کمک خواستید می تونید از طریق پ.خ یا تماس تلفنی با من در ارتباط باشید.

[ParsNetwork]

فکر نمی کنم بتونه این مراحل رو انجام بده بهتره هزینه کنید براتون کانفیگ کنند یا کلا آموزش های اولیه رو مطالعه کنید

[guerillamethod]

درود،
آسان ترین کار اینه که شما هر جا yum install زدید، به yum remove تغییر بدهید.

برای سیستم بلاگ دهی، شما به
وب سرور
دیتابیس سرور (مثل Mysql)
PHP و مد های آن

نیاز مندید و نه هیچ چیز دیگر.
نصب کنترل پنل و پکیج های اضافی فقط سرعت سرور شما رو کاهش می دهد .