PDA

توجه ! این یک نسخه آرشیو شده میباشد و در این حالت شما عکسی را مشاهده نمیکنید برای مشاهده کامل متن و عکسها بر روی لینک مقابل کلیک کنید : راهنمایی کنید | چطوری هاردم رو غیر قابل Recovery کنم؟؟؟



aghaee
June 26th, 2011, 14:50
سلام و خسته نباشید

میخواستم لپ تاپم رو بفروشم، منتها چند تا عکس شخصی تو هاردش دارم که میخوام به هیچ عنوان نشه از هاردش Recovery کرد

میشه راهنمایی کنید؟


با تشکر

agarb98
June 26th, 2011, 15:05
با این نرم افزار امکانش هست

Jetico Bc Wipe

---------- Post added at 03:05 PM ---------- Previous post was at 02:58 PM ----------

لینک دانلود نرم افزار Jetico Bc Wipe (http://dl.soft98.ir/soft/Jetico.BCWipe.4.01.24.zip)
نرم افزاری می باشد که به کمک آن کاربران قادر به پاکسازی کامل اطلاعات می باشند. به وسیله این نرم افزار می توان فایل های مختلف با فرمت های گوناگون را به صورت کامل از هارد دیسک به گونه ای پاکسازی نمود که دیگر قابلیت بازیابی فایل ها با برنامه های بازیابی اطلاعات نیز ممکن نیست. این نرم افزار با ویژگی تکه تکه نمودن اطلاعات و فایل ها مانع از بازیابی آن ها می شود . همچنین به کمک ابزار موجود در این نرم افزار می توان کلیه هارد را به صورت ایمن فرمت نمود و تمامی اطلاعات را تا آخرین بایت از بین برد. انتخاب فایل های مشخص شده توسط خود کاربر و نابودی آن ها نیز از ویژگی های دیگر این نرم افزار می باشد. این نرم افزار محصولی از شرکت Jetico می باشد.
تست شده است .

mohammad462
June 26th, 2011, 15:21
میتونی کل هاردتو Lowlevel format کنی که از همه روشها بهتره.البته بزن که همزمان هم low level format کنه هم fill with zero

aghaee
June 26th, 2011, 15:27
میتونی کل هاردتو Lowlevel format کنی که از همه روشها بهتره.البته بزن که همزمان هم low level format کنه هم fill with zero

میشه راهنمایی کنید که چطوری؟ از کجا؟ نیاز به نرم افزار داره؟

ویندوز من سون 64 بیت هست

با تشکر

mohammad462
June 26th, 2011, 15:55
میشه راهنمایی کنید که چطوری؟ از کجا؟ نیاز به نرم افزار داره؟

ویندوز من سون 64 بیت هست

با تشکر
شما کل هاردو اگه میخوای بزنی از این استفاده کن نه یک فایل.
توی گوگل سرچ کنی نرم افزاراش هست.میتونی از Hirens BootCD استفاده کنی .

aghaee
June 26th, 2011, 16:02
شما کل هاردو اگه میخوای بزنی از این استفاده کن نه یک فایل.
توی گوگل سرچ کنی نرم افزاراش هست.میتونی از Hirens BootCD استفاده کنی .

سلام، ممنون داداش
این نرم افزار رو دارم، خوب چطوری میشه راهنمایی کنید؟
با تشکر

MagicVps.Com
June 26th, 2011, 17:38
http://hddguru.com/download/dl.php?file=c29mdHdhcmUvSERER1VSVS1Mb3ctTGV2ZWwtRm 9ybWF0LVRvb2wvTExGc2V0dXAuMi4zNi4xMTgxLmV4ZQ,,&action=41417559de1d2696348922cb4730e2b0&magic=363637&rectum=1000




HDD Low Level Format Tool is a freeware utility for low-level hard disk drive formatting.


•Supported interfaces: S-ATA (SATA), IDE (E-IDE), SCSI, USB, FIREWIRE. Big drives (LBA-48) are supported.

•Supported Manufacturers: Maxtor, Hitachi, Seagate, Samsung, Toshiba, Fujitsu, IBM, Quantum, Western Digital.

•The program also supports low-level formatting of FLASH cards using a card-reader.

This freeware Low Level Format utility will erase, Low-Level Format and re-certify a SATA, IDE or SCSI hard disk drive with any size of up to 281 474 976 710 655 bytes. Will work with USB and FIREWIRE external drive enclosures. Low-level formatting of Flash Cards is supported too. Low Level Format Tool will clear partitions, MBR, and every bit of user data. The data cannot be recovered after using this utility. The program utilizes Ultra-DMA transfers when possible.

WARNING: After running this free low level format tool, the whole disk surface will be fully erased.
Therefore, data restoration will be impossible after using this utility!

saeli
June 26th, 2011, 17:39
میتونی کل هارد را برای چند بار پر کنی و بعدش فرمت کن

MagicVps.Com
June 26th, 2011, 17:51
از این جا هم میتونی استفاده کنی بر حسب مارک هاردت از لینکهای معرفی شده باری مارک مورد نظر استفاده کن


Low level format utilities for the hard disk

Important drive information (servo, sector layout, and defect management, etc.) is stored in the low-level format at the factory. This information is designed to last the life of the drive and therefore it is not possible to low level the drive outside the factory. Although some drive manufactures and BIOS provided so-called "low level format utilities", they actually perform a write-read verify of the drive’s user data sectors, and do not actually perform a low-level format. In the event of a corrupted master boot record or boot block virus, use FDISK /MBR command to restore the master boot record. If you need to low level format your hard drive then check the drive manufacturer and download such an utility from its website. Every drive manufacturer provides just such a utility. Below is a list of hard drive manufacturers with a links to low level format utilities.


Note: If normal (high level) hard disk formatting is required, you can use DOS FDISK command to first erase and create partitions and then use FORMAT. It is also a good idea when you hard disk becomes inaccessible to see if it is just the system files that are corrupted. Most of the time, it is the case. SYS will do the job of replacing system files. Therefore, low level format is always of LAST RESORT when you encounter HDD problems.

IBM(Hitachi)
Downloads (http://www.hgst.com/hdd/support/download.htm)

Seagate
Redirect (http://www.seagate.com/support/disc/utils.html)

Maxtor
Maxtor is now Seagate (http://www.maxtor.com/en/support/downloads/index.htm)

Fujitsu
http://www.fel.fujitsu.com/home/drivers.asp?L=en&CID=1

Samsung
SAMSUNG Hard Disk Drive (http://www.samsung.com/Products/HardDiskDrive/utilities/index.htm)
FAQ: Low level format

Western Digital
WD Support / Downloads / Select Product (http://support.wdc.com/download/index.asp)

If you are not sure in your hard drive and need software for disk failure prediction then you can try a well known Active SMART software. Active SMART is an industry leading S.M.A.R.T. diagnostic and failure prediction software for hard drives. Its main goal is timely detecting and anticipating any problems, occurring with the hard disk, before the danger of the data loss appears.

aghaee
June 26th, 2011, 22:53
از این جا هم میتونی استفاده کنی بر حسب مارک هاردت از لینکهای معرفی شده باری مارک مورد نظر استفاده کن


Low level format utilities for the hard disk

Important drive information (servo, sector layout, and defect management, etc.) is stored in the low-level format at the factory. This information is designed to last the life of the drive and therefore it is not possible to low level the drive outside the factory. Although some drive manufactures and BIOS provided so-called "low level format utilities", they actually perform a write-read verify of the drive’s user data sectors, and do not actually perform a low-level format. In the event of a corrupted master boot record or boot block virus, use FDISK /MBR command to restore the master boot record. If you need to low level format your hard drive then check the drive manufacturer and download such an utility from its website. Every drive manufacturer provides just such a utility. Below is a list of hard drive manufacturers with a links to low level format utilities.


Note: If normal (high level) hard disk formatting is required, you can use DOS FDISK command to first erase and create partitions and then use FORMAT. It is also a good idea when you hard disk becomes inaccessible to see if it is just the system files that are corrupted. Most of the time, it is the case. SYS will do the job of replacing system files. Therefore, low level format is always of LAST RESORT when you encounter HDD problems.

IBM(Hitachi)
Downloads (http://www.hgst.com/hdd/support/download.htm)

Seagate
Redirect (http://www.seagate.com/support/disc/utils.html)

Maxtor
Maxtor is now Seagate (http://www.maxtor.com/en/support/downloads/index.htm)

Fujitsu
http://www.fel.fujitsu.com/home/drivers.asp?L=en&CID=1

Samsung
SAMSUNG Hard Disk Drive (http://www.samsung.com/Products/HardDiskDrive/utilities/index.htm)
FAQ: Low level format

Western Digital
WD Support / Downloads / Select Product (http://support.wdc.com/download/index.asp)

If you are not sure in your hard drive and need software for disk failure prediction then you can try a well known Active SMART software. Active SMART is an industry leading S.M.A.R.T. diagnostic and failure prediction software for hard drives. Its main goal is timely detecting and anticipating any problems, occurring with the hard disk, before the danger of the data loss appears.

من که چیزی متوجه نشدم، لپ تاپ مت Fujitsu است

ممنون مشم بیشتر توضیح بدین

با تشکر

---------- Post added at 09:53 PM ---------- Previous post was at 09:01 PM ----------


از این جا هم میتونی استفاده کنی بر حسب مارک هاردت از لینکهای معرفی شده باری مارک مورد نظر استفاده کن


Low level format utilities for the hard disk

Important drive information (servo, sector layout, and defect management, etc.) is stored in the low-level format at the factory. This information is designed to last the life of the drive and therefore it is not possible to low level the drive outside the factory. Although some drive manufactures and BIOS provided so-called "low level format utilities", they actually perform a write-read verify of the drive’s user data sectors, and do not actually perform a low-level format. In the event of a corrupted master boot record or boot block virus, use FDISK /MBR command to restore the master boot record. If you need to low level format your hard drive then check the drive manufacturer and download such an utility from its website. Every drive manufacturer provides just such a utility. Below is a list of hard drive manufacturers with a links to low level format utilities.


Note: If normal (high level) hard disk formatting is required, you can use DOS FDISK command to first erase and create partitions and then use FORMAT. It is also a good idea when you hard disk becomes inaccessible to see if it is just the system files that are corrupted. Most of the time, it is the case. SYS will do the job of replacing system files. Therefore, low level format is always of LAST RESORT when you encounter HDD problems.

IBM(Hitachi)
Downloads (http://www.hgst.com/hdd/support/download.htm)

Seagate
Redirect (http://www.seagate.com/support/disc/utils.html)

Maxtor
Maxtor is now Seagate (http://www.maxtor.com/en/support/downloads/index.htm)

Fujitsu
http://www.fel.fujitsu.com/home/drivers.asp?L=en&CID=1

Samsung
SAMSUNG Hard Disk Drive (http://www.samsung.com/Products/HardDiskDrive/utilities/index.htm)
FAQ: Low level format

Western Digital
WD Support / Downloads / Select Product (http://support.wdc.com/download/index.asp)

If you are not sure in your hard drive and need software for disk failure prediction then you can try a well known Active SMART software. Active SMART is an industry leading S.M.A.R.T. diagnostic and failure prediction software for hard drives. Its main goal is timely detecting and anticipating any problems, occurring with the hard disk, before the danger of the data loss appears.

من که چیزی متوجه نشدم، لپ تاپ مت Fujitsu است

ممنون مشم بیشتر توضیح بدین

با تشکر

MagicVps.Com
June 26th, 2011, 23:09
کاری به مارک لب تابت نداره
چکن ببن هادر لب تابت مارکش چیه با توجه به مارکش یکی از این لینکها که داده شده استافده کن داخل ره کدومش توضیحات مربوط به لولول فرمت هارت هست

mohammad462
June 27th, 2011, 00:52
در ضمن یادت باشه که این کار زمانبر هست.ممکنه تا 10ساعت هم طول بکشه یا بیشتر.بستگی به هاردت داره ولی انتظار نداشته باش دو دقیقه ای تموم بشه.و مهم تر از همه سعی کن جای لبتابت خنک باشه چون بدجور هارد داغ میکنه.

MagicVps.Com
June 27th, 2011, 01:38
بله دقیقا چون میاد هارد سکتور به سکتور از اول برات صفر میکنه و حداقل حداقل شاید 5 ساعت وقت ببره تا 24 و بیشتر حتی پس حتما شارژر لبتابت وصل بزار وسط کار برق قطع بشه کارت تمامه و ممکنه هادرت بپره کلا

Sindad
June 27th, 2011, 12:29
اگر هم بخواهید از برنامه استفاده نکنید می توانید یک فایل fake به حجم بالا بسازید و در کل هاردتان کپی کنید تا حجمش پر شود اگر ریکاوری گردد به فایل های fake دست پیدا می کند