توجه ! این یک نسخه آرشیو شده میباشد و در این حالت شما عکسی را مشاهده نمیکنید برای مشاهده کامل متن و عکسها بر روی لینک مقابل کلیک کنید : ارور 504 - Gateway Timeout
edius
September 10th, 2018, 23:56
سلام .
از میزبان خودتون بخواین مشکل رو بررسی کنن .
از خیلی موارد میتونه باشه از جمله memory limit
سرور مجازی هست دوست عزیز ،
سیستم Centos7 - ,وب سرور Ngnix
اینم مشخصات کلی :
Processor Name
Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz
Vendor ID
GenuineIntel
Processor Speed (MHz)
3699.998
Processor Name
Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz
Vendor ID
GenuineIntel
Processor Speed (MHz)
3699.998
Total Memory
3881036 kB
Free Memory
777612 kB
Total Swap Memory
261116 kB
Free Swap Memory
257780 kB
System Uptime
1 Days, 9 Hours and 52 Minutes
DirectAdmin 1.53.4
Running
Exim 4.91
Running
MariaDB 10.0.35
Running
Named 9.9.4
Running
sshd
Running
Nginx 1.15.1
Running
dovecot 2.3.2.1 (0719df592)
Running
pure-ftpd 1.0.47
Running
Php 7.0.31
Installed
- - - Updated - - -
بنده محتوای فایل Php.ini رو میزارم دوستان لطفا برسی کنید .
[PHP]
;;;;;;;;;;;;;;;;;;;; About php.ini ;;;;;;;;;;;;;;;;;;;;; PHP's initialization file, generally called php.ini, is responsible for; configuring many of the aspects of PHP's behavior.
; PHP attempts to find and load this configuration from a number of locations.; The following is a summary of its search order:; 1. SAPI module specific location.; 2. The PHPRC environment variable. (As of PHP 5.2.0); 3. A number of predefined registry keys on Windows (As of PHP 5.2.0); 4. Current working directory (except CLI); 5. The web server's directory (for SAPI modules), or directory of PHP; (otherwise in Windows); 6. The directory from the --with-config-file-path compile time option, or the; Windows directory (C:\windows or C:\winnt); See the PHP docs for more specific information.; http://php.net/configuration.file
; The syntax of the file is extremely simple. Whitespace and lines; beginning with a semicolon are silently ignored (as you probably guessed).; Section headers (e.g. [Foo]) are also silently ignored, even though; they might mean something in the future.
; Directives following the section heading [PATH=/www/mysite] only; apply to PHP files in the /www/mysite directory. Directives; following the section heading [HOST=www.example.com] only apply to; PHP files served from www.example.com. Directives set in these; special sections cannot be overridden by user-defined INI files or; at runtime. Currently, [PATH=] and [HOST=] sections only work under; CGI/FastCGI.; http://php.net/ini.sections
; Directives are specified using the following syntax:; directive = value; Directive names are *case sensitive* - foo=bar is different from FOO=bar.; Directives are variables used to configure PHP or PHP extensions.; There is no name validation. If PHP can't find an expected; directive because it is not set or is mistyped, a default value will be used.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one; of the INI constants (On, Off, True, False, Yes, No and None) or an expression; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a; previously set variable or directive (e.g. ${foo})
; Expressions in the INI file are limited to bitwise operators and parentheses:; | bitwise OR; ^ bitwise XOR; & bitwise AND; ~ bitwise NOT; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal; sign, or by using the None keyword:
; foo = ; sets foo to an empty string; foo = None ; sets foo to an empty string; foo = "None" ; sets foo to the string 'None'
; If you use constants in your value, and these constants belong to a; dynamically loaded extension (either a PHP extension or a Zend extension),; you may only use these constants *after* the line that loads the extension.
;;;;;;;;;;;;;;;;;;;; About this file ;;;;;;;;;;;;;;;;;;;;; PHP comes packaged with two INI files. One that is recommended to be used; in production environments and one that is recommended to be used in; development environments.
; php.ini-production contains settings which hold security, performance and; best practices at its core. But please be aware, these settings may break; compatibility with older or less security conscience applications. We; recommending using the production ini in production and testing environments.
; php.ini-development is very similar to its production variant, except it is; much more verbose when it comes to errors. We recommend using the; development version only in development environments, as errors shown to; application users can inadvertently leak otherwise secure information.
; This is php.ini-production INI file.
;;;;;;;;;;;;;;;;;;;; Quick Reference ;;;;;;;;;;;;;;;;;;;;; The following are all the settings which are different in either the production; or development versions of the INIs with respect to PHP's default behavior.; Please see the actual settings later in the document for more details as to why; we recommend these changes in PHP's behavior.
; display_errors; Default Value: On; Development Value: On; Production Value: Off
; display_startup_errors; Default Value: Off; Development Value: On; Production Value: Off
; error_reporting; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED; Development Value: E_ALL; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; html_errors; Default Value: On; Development Value: On; Production value: On
; log_errors; Default Value: Off; Development Value: On; Production Value: On
; max_input_time; Default Value: -1 (Unlimited); Development Value: 60 (60 seconds); Production Value: 60 (60 seconds)
; output_buffering; Default Value: Off; Development Value: 4096; Production Value: 4096
; register_argc_argv; Default Value: On; Development Value: Off; Production Value: Off
; request_order; Default Value: None; Development Value: "GP"; Production Value: "GP"
; session.gc_divisor; Default Value: 100; Development Value: 1000; Production Value: 1000
; session.hash_bits_per_character; Default Value: 4; Development Value: 5; Production Value: 5
; short_open_tag; Default Value: On; Development Value: Off; Production Value: Off
; track_errors; Default Value: Off; Development Value: On; Production Value: Off
; url_rewriter.tags; Default Value: "a=href,area=href,frame=src,form=,fieldset="; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentr y"; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentr y"
; variables_order; Default Value: "EGPCS"; Development Value: "GPCS"; Production Value: "GPCS"
;;;;;;;;;;;;;;;;;;;;; php.ini Options ;;;;;;;;;;;;;;;;;;;;;; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini";user_ini.filename = ".user.ini"
; To disable this feature set this option to empty value;user_ini.filename =
; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes);user_ini.cache_ttl = 300
;;;;;;;;;;;;;;;;;;;;; Language Options ;;;;;;;;;;;;;;;;;;;;;
; Enable the PHP scripting language engine under Apache.; http://php.net/engineengine = On
; This directive determines whether or not PHP will recognize code between; <? and ?> tags as PHP source which should be processed as such. It is; generally recommended that <?php and ?> should be used and that this feature; should be disabled, as enabling it may result in issues when generating XML; documents, however this remains supported for backward compatibility reasons.; Note that this directive does not control the <?= shorthand tag, which can be; used regardless of this directive.; Default Value: On; Development Value: Off; Production Value: Off; http://php.net/short-open-tagshort_open_tag = On
; The number of significant digits displayed in floating point numbers.; http://php.net/precisionprecision = 14
; Output buffering is a mechanism for controlling how much output data; (excluding headers and cookies) PHP should keep internally before pushing that; data to the client. If your application's output exceeds this setting, PHP; will send that data in chunks of roughly the size you specify.; Turning on this setting and managing its maximum buffer size can yield some; interesting side-effects depending on your application and web server.; You may be able to send headers and cookies after you've already sent output; through print or echo. You also may see performance benefits if your server is; emitting less packets due to buffered output versus PHP streaming the output; as it gets it. On production servers, 4096 bytes is a good setting for performance; reasons.; Note: Output buffering can also be controlled via Output Buffering Control; functions.; Possible Values:; On = Enabled and buffer is unlimited. (Use with caution); Off = Disabled; Integer = Enables the buffer and sets its maximum size in bytes.; Note: This directive is hardcoded to Off for the CLI SAPI; Default Value: Off; Development Value: 4096; Production Value: 4096; http://php.net/output-bufferingoutput_buffering = 4096
; You can redirect all of the output of your scripts to a function. For; example, if you set output_handler to "mb_output_handler", character; encoding will be transparently converted to the specified encoding.; Setting any output handler automatically turns on output buffering.; Note: People who wrote portable scripts should not depend on this ini; directive. Instead, explicitly set the output handler using ob_start().; Using this ini directive may cause problems unless you know what script; is doing.; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"; and you cannot use both "ob_gzhandler" and "zlib.output_compression".; Note: output_handler must be empty if this is set 'On' !!!!; Instead you must use zlib.output_handler.; http://php.net/output-handler;output_handler =
; Transparent output compression using the zlib library; Valid values for this option are 'off', 'on', or a specific buffer size; to be used for compression (default is 4KB); Note: Resulting chunk size may vary due to nature of compression. PHP; outputs chunks that are few hundreds bytes each as a result of; compression. If you prefer a larger chunk size for better; performance, enable output_buffering in addition.; Note: You need to use zlib.output_handler instead of the standard; output_handler, or otherwise the output will be corrupted.; http://php.net/zlib.output-compressionzlib.output_compression = Off
; http://php.net/zlib.output-compression-level;zlib.output_compression_level = -1
; You cannot specify additional output handlers if zlib.output_compression; is activated here. This setting does the same as output_handler but in; a different order.; http://php.net/zlib.output-handler;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself; automatically after every output block. This is equivalent to calling the; PHP function flush() after each and every call to print() or echo() and each; and every HTML block. Turning this option on has serious performance; implications and is generally recommended for debugging purposes only.; http://php.net/implicit-flush; Note: This directive is hardcoded to On for the CLI SAPIimplicit_flush = Off
; The unserialize callback function will be called (with the undefined class'; name as parameter), if the unserializer finds an undefined class; which should be instantiated. A warning appears if the specified function is; not defined, or if the function doesn't include/implement the missing class.; So only set this entry, if you really want to implement such a; callback-function.unserialize_callback_func =
; When floats & doubles are serialized store serialize_precision significant; digits after the floating point. The default value ensures that when floats; are decoded with unserialize, the data will remain the same.serialize_precision = 17
; open_basedir, if set, limits all file operations to the defined directory; and below. This directive makes most sense if used in a per-directory; or per-virtualhost web server configuration file.; http://php.net/open-basedir;open_basedir =
; This directive allows you to disable certain functions for security reasons.; It receives a comma-delimited list of function names.; http://php.net/disable-functionsdisable_functions = shell_exec,proc_close,proc_open,dl,popen,show_sour ce,posix_kill,posix_mkfifo,posix_getpwuid,posix_se tpgid,posix_setsid,posix_setuid,posix_setgid,posix _seteuid,posix_setegid,posix_uname
; This directive allows you to disable certain classes for security reasons.; It receives a comma-delimited list of class names.; http://php.net/disable-classesdisable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in; <span style="color: ???????"> would work.; http://php.net/syntax-highlighting;highlight.string = #DD0000;highlight.comment = #FF9900;highlight.keyword = #007700;highlight.default = #0000BB;highlight.html = #000000
; If enabled, the request will be allowed to complete even if the user aborts; the request. Consider enabling it if executing long requests, which may end up; being interrupted by the user or a browser timing out. PHP's default behavior; is to disable this feature.; http://php.net/ignore-user-abort;ignore_user_abort = On
; Determines the size of the realpath cache to be used by PHP. This value should; be increased on systems where PHP opens many files to reflect the quantity of; the file operations performed.; http://php.net/realpath-cache-size;realpath_cache_size = 4096k
; Duration of time, in seconds for which to cache realpath information for a given; file or directory. For systems with rarely changing files, consider increasing this; value.; http://php.net/realpath-cache-ttl;realpath_cache_ttl = 120
; Enables or disables the circular reference collector.; http://php.net/zend.enable-gczend.enable_gc = On
; If enabled, scripts may be written in encodings that are incompatible with; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such; encodings. To use this feature, mbstring extension must be enabled.; Default: Off;zend.multibyte = Off
; Allows to set the default encoding for the scripts. This value will be used; unless "declare(encoding=...)" directive appears at the top of the script.; Only affects if zend.multibyte is set.; Default: "";zend.script_encoding =
;;;;;;;;;;;;;;;;;; Miscellaneous ;;;;;;;;;;;;;;;;;;
; Decides whether PHP may expose the fact that it is installed on the server; (e.g. by adding its signature to the Web server header). It is no security; threat in any way, but it makes it possible to determine whether you use PHP; on your server or not.; http://php.net/expose-phpexpose_php = On
;;;;;;;;;;;;;;;;;;;; Resource Limits ;;;;;;;;;;;;;;;;;;;;
; Maximum execution time of each script, in seconds; http://php.net/max-execution-time; Note: This directive is hardcoded to 0 for the CLI SAPImax_execution_time = 300
; Maximum amount of time each script may spend parsing request data. It's a good; idea to limit this time on productions servers in order to eliminate unexpectedly; long running scripts.; Note: This directive is hardcoded to -1 for the CLI SAPI; Default Value: -1 (Unlimited); Development Value: 60 (60 seconds); Production Value: 60 (60 seconds); http://php.net/max-input-timemax_input_time = 300
; Maximum input variable nesting level; http://php.net/max-input-nesting-level;max_input_nesting_level = 64
; How many GET/POST/COOKIE input variables may be accepted; max_input_vars = 1000
; Maximum amount of memory a script may consume (128MB); http://php.net/memory-limitmemory_limit = 900M
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Error handling and logging ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; This directive informs PHP of which errors, warnings and notices you would like; it to take action for. The recommended way of setting values for this; directive is through the use of the error level constants and bitwise; operators. The error level constants are below here for convenience as well as; some common settings and their meanings.; By default, PHP is set to take action on all errors, notices and warnings EXCEPT; those related to E_NOTICE and E_STRICT, which together cover best practices and; recommended coding standards in PHP. For performance reasons, this is the; recommend error reporting setting. Your production server shouldn't be wasting; resources complaining about best practices and coding standards. That's what; development servers and development settings are for.; Note: The php.ini-development file has this setting as E_ALL. This; means it pretty much reports everything which is exactly what you want during; development and early testing.;; Error Level Constants:; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0); E_ERROR - fatal run-time errors; E_RECOVERABLE_ERROR - almost fatal run-time errors; E_WARNING - run-time warnings (non-fatal errors); E_PARSE - compile-time parse errors; E_NOTICE - run-time notices (these are warnings which often result; from a bug in your code, but it's possible that it was; intentional (e.g., using an uninitialized variable and; relying on the fact it is automatically initialized to an; empty string); E_STRICT - run-time notices, enable to have PHP suggest changes; to your code which will ensure the best interoperability; and forward compatibility of your code; E_CORE_ERROR - fatal errors that occur during PHP's initial startup; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's; initial startup; E_COMPILE_ERROR - fatal compile-time errors; E_COMPILE_WARNING - compile-time warnings (non-fatal errors); E_USER_ERROR - user-generated error message; E_USER_WARNING - user-generated warning message; E_USER_NOTICE - user-generated notice message; E_DEPRECATED - warn about code that will not work in future versions; of PHP; E_USER_DEPRECATED - user-generated deprecation warnings;; Common Values:; E_ALL (Show all errors, warnings and notices including coding standards.); E_ALL & ~E_NOTICE (Show all errors, except for notices); E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.); E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE _ERROR (Show only errors); Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED; Development Value: E_ALL; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT; http://php.net/error-reportingerror_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
; This directive controls whether or not and where PHP will output errors,; notices and warnings too. Error output is very useful during development, but; it could be very dangerous in production environments. Depending on the code; which is triggering the error, sensitive information could potentially leak; out of your application such as database usernames and passwords or worse.; For production environments, we recommend logging errors rather than; sending them to STDOUT.; Possible Values:; Off = Do not display any errors; stderr = Display errors to STDERR (affects only CGI/CLI binaries!); On or stdout = Display errors to STDOUT; Default Value: On; Development Value: On; Production Value: Off; http://php.net/display-errorsdisplay_errors = Off
; The display of errors which occur during PHP's startup sequence are handled; separately from display_errors. PHP's default behavior is to suppress those; errors from clients. Turning the display of startup errors on can be useful in; debugging configuration problems. We strongly recommend you; set this to 'off' for production servers.; Default Value: Off; Development Value: On; Production Value: Off; http://php.net/display-startup-errorsdisplay_startup_errors = Off
; Besides displaying errors, PHP can also log errors to locations such as a; server-specific log, STDERR, or a location specified by the error_log; directive found below. While errors should not be displayed on productions; servers they should still be monitored and logging is a great way to do that.; Default Value: Off; Development Value: On; Production Value: On; http://php.net/log-errorslog_errors = On
; Set maximum length of log_errors. In error_log information about the source is; added. The default is 1024 and 0 allows to not apply any maximum length at all.; http://php.net/log-errors-max-lenlog_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same; line unless ignore_repeated_source is set true.; http://php.net/ignore-repeated-errorsignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting; is On you will not log errors with repeated messages from different files or; source lines.; http://php.net/ignore-repeated-sourceignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on; stdout or in the log). This has only effect in a debug compile, and if; error reporting includes E_WARNING in the allowed list; http://php.net/report-memleaksreport_memleaks = On
; This setting is on by default.;report_zend_debug = 0
; Store the last error/warning message in $php_errormsg (boolean). Setting this value; to On can assist in debugging and is appropriate for development servers. It should; however be disabled on production servers.; Default Value: Off; Development Value: On; Production Value: Off; http://php.net/track-errorstrack_errors = Off
; Turn off normal error reporting and emit XML-RPC error XML; http://php.net/xmlrpc-errors;xmlrpc_errors = 0
; An XML-RPC faultCode;xmlrpc_error_number = 0
; When PHP displays or logs an error, it has the capability of formatting the; error message as HTML for easier reading. This directive controls whether; the error message is formatted as HTML or not.; Note: This directive is hardcoded to Off for the CLI SAPI; Default Value: On; Development Value: On; Production value: On; http://php.net/html-errorshtml_errors = On
; If html_errors is set to On *and* docref_root is not empty, then PHP; produces clickable error messages that direct to a page describing the error; or function causing the error in detail.; You can download a copy of the PHP manual from http://php.net/docs; and change docref_root to the base URL of your local copy including the; leading '/'. You must also specify the file extension being used including; the dot. PHP's default behavior is to leave these settings empty, in which; case no links to documentation are generated.; Note: Never use this feature for production boxes.; http://php.net/docref-root; Examples;docref_root = "/phpmanual/"
; http://php.net/docref-ext;docref_ext = .html
; String to output before an error message. PHP's default behavior is to leave; this setting blank.; http://php.net/error-prepend-string; Example:;error_prepend_string = "<span style='color: #ff0000'>"
; String to output after an error message. PHP's default behavior is to leave; this setting blank.; http://php.net/error-append-string; Example:;error_append_string = "</span>"
; Log errors to specified file. PHP's default behavior is to leave this value; empty.; http://php.net/error-log; Example:;error_log = php_errors.log; Log errors to syslog (Event Log on Windows).;error_log = syslog
;windows.show_crt_warning; Default value: 0; Development value: 0; Production value: 0
;;;;;;;;;;;;;;;;;; Data Handling ;;;;;;;;;;;;;;;;;;
; The separator used in PHP generated URLs to separate arguments.; PHP's default setting is "&".; http://php.net/arg-separator.output; Example:;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.; PHP's default setting is "&".; NOTE: Every character in this directive is considered as separator!; http://php.net/arg-separator.input; Example:;arg_separator.input = ";&"
; This directive determines which super global arrays are registered when PHP; starts up. G,P,C,E & S are abbreviations for the following respective super; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty; paid for the registration of these arrays and because ENV is not as commonly; used as the others, ENV is not recommended on productions servers. You; can still get access to the environment variables through getenv() should you; need to.; Default Value: "EGPCS"; Development Value: "GPCS"; Production Value: "GPCS";; http://php.net/variables-ordervariables_order = "GPCS"
; This directive determines which super global data (G,P & C) should be; registered into the super global array REQUEST. If so, it also determines; the order in which that data is registered. The values for this directive; are specified in the same manner as the variables_order directive,; EXCEPT one. Leaving this value empty will cause PHP to use the value set; in the variables_order directive. It does not mean it will leave the super; globals array REQUEST empty.; Default Value: None; Development Value: "GP"; Production Value: "GP"; http://php.net/request-orderrequest_order = "GP"
; This directive determines whether PHP registers $argv & $argc each time it; runs. $argv contains an array of all the arguments passed to PHP when a script; is invoked. $argc contains an integer representing the number of arguments; that were passed when the script was invoked. These arrays are extremely; useful when running scripts from the command line. When this directive is; enabled, registering these variables consumes CPU cycles and memory each time; a script is executed. For performance reasons, this feature should be disabled; on production servers.; Note: This directive is hardcoded to On for the CLI SAPI; Default Value: On; Development Value: Off; Production Value: Off; http://php.net/register-argc-argvregister_argc_argv = Off
; When enabled, the ENV, REQUEST and SERVER variables are created when they're; first used (Just In Time) instead of when the script starts. If these; variables are not used within a script, having this directive on will result; in a performance gain. The PHP directive register_argc_argv must be disabled; for this directive to have any affect.; http://php.net/auto-globals-jitauto_globals_jit = On
; Whether PHP will read the POST data.; This option is enabled by default.; Most likely, you won't want to disable this option globally. It causes $_POST; and $_FILES to always be empty; the only way you will be able to read the; POST data will be through the php://input stream wrapper. This can be useful; to proxy requests or to process the POST data in a memory efficient fashion.; http://php.net/enable-post-data-reading;enable_post_data_reading = Off
; Maximum size of POST data that PHP will accept.; Its value may be 0 to disable the limit. It is ignored if POST data reading; is disabled through enable_post_data_reading.; http://php.net/post-max-sizepost_max_size = 128M
; Automatically add files before PHP document.; http://php.net/auto-prepend-fileauto_prepend_file =
; Automatically add files after PHP document.; http://php.net/auto-append-fileauto_append_file =
; By default, PHP will output a media type using the Content-Type header. To; disable this, simply set it to be empty.;; PHP's built-in default media type is set to text/html.; http://php.net/default-mimetypedefault_mimetype = "text/html"
; PHP's default character set is set to UTF-8.; http://php.net/default-charsetdefault_charset = "UTF-8"
; PHP internal character encoding is set to empty.; If empty, default_charset is used.; http://php.net/internal-encoding;internal_encoding =
; PHP input character encoding is set to empty.; If empty, default_charset is used.; http://php.net/input-encoding;input_encoding =
; PHP output character encoding is set to empty.; If empty, default_charset is used.; See also output_buffer.; http://php.net/output-encoding;output_encoding =
;;;;;;;;;;;;;;;;;;;;;;;;;; Paths and Directories ;;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2";include_path = ".:/php/includes";; Windows: "\path1;\path2";include_path = ".;c:\php\includes";; PHP's default setting for include_path is ".;/path/to/php/pear"; http://php.net/include-path
; The root of the PHP pages, used only if nonempty.; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root; if you are running php as a CGI under any web server (other than IIS); see documentation for security issues. The alternate is to use the; cgi.force_redirect configuration below; http://php.net/doc-rootdoc_root =
; The directory under which PHP opens the script using /~username used only; if nonempty.; http://php.net/user-diruser_dir =
; Directory in which the loadable extensions (modules) reside.; http://php.net/extension-dir; extension_dir = "./"; On windows:; extension_dir = "ext"
; Directory where the temporary files should be placed.; Defaults to the system default (see sys_get_temp_dir); sys_temp_dir = "/tmp"
; Whether or not to enable the dl() function. The dl() function does NOT work; properly in multithreaded servers, such as IIS or Zeus, and is automatically; disabled on them.; http://php.net/enable-dlenable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under; most web servers. Left undefined, PHP turns this on by default. You can; turn it off here AT YOUR OWN RISK; **You CAN safely turn this off for IIS, in fact, you MUST.**; http://php.net/cgi.force-redirect;cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with; every request. PHP's default behavior is to disable this feature.;cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape; (iPlanet) web servers, you MAY need to set an environment variable name that PHP; will look for to know it is OK to continue execution. Setting this variable MAY; cause security issues, KNOW WHAT YOU ARE DOING FIRST.; http://php.net/cgi.redirect-status-env;cgi.redirect_status_env =
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting; of zero causes PHP to behave as before. Default is 1. You should fix your scripts; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.; http://php.net/cgi.fix-pathinfo;cgi.fix_pathinfo=1
; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside; of the web tree and people will not be able to circumvent .htaccess security.; http://php.net/cgi.dicard-path;cgi.discard_path=1
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate; security tokens of the calling client. This allows IIS to define the; security context that the request runs under. mod_fastcgi under Apache; does not currently support this feature (03/17/2002); Set to 1 if running under IIS. Default is zero.; http://php.net/fastcgi.impersonate;fastcgi.impersonate = 1
; Disable logging through FastCGI connection. PHP's default behavior is to enable; this feature.;fastcgi.logging = 0
; cgi.rfc2616_headers configuration option tells PHP what type of headers to; use when sending HTTP response code. If set to 0, PHP sends Status: header that; is supported by Apache. When this option is set to 1, PHP will send; RFC2616 compliant header.; Default is zero.; http://php.net/cgi.rfc2616-headers;cgi.rfc2616_headers = 0
; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!; (shebang) at the top of the running script. This line might be needed if the; script support running both as stand-alone script and via PHP CGI<. PHP in CGI; mode skips this line and ignores its content if this directive is turned on.; http://php.net/cgi.check-shebang-line;cgi.check_shebang_line=1
;;;;;;;;;;;;;;;;; File Uploads ;;;;;;;;;;;;;;;;;
; Whether to allow HTTP file uploads.; http://php.net/file-uploadsfile_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not; specified).; http://php.net/upload-tmp-dir;upload_tmp_dir =
; Maximum allowed size for uploaded files.; http://php.net/upload-max-filesizeupload_max_filesize = 128M
; Maximum number of files that can be uploaded via a single requestmax_file_uploads = 20
;;;;;;;;;;;;;;;;;;; Fopen wrappers ;;;;;;;;;;;;;;;;;;;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.; http://php.net/allow-url-fopenallow_url_fopen = On
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.; http://php.net/allow-url-includeallow_url_include = Off
; Define the anonymous ftp password (your email address). PHP's default setting; for this is empty.; http://php.net/from;from="john@doe.com"
; Define the User-Agent string. PHP's default setting for this is empty.; http://php.net/user-agent;user_agent="PHP"
; Default timeout for socket based streams (seconds); http://php.net/default-socket-timeoutdefault_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,; or you are running on a Mac and need to deal with files from; unix or win32 systems, setting this flag will cause PHP to; automatically detect the EOL character in those files so that; fgets() and file() will work regardless of the source of the file.; http://php.net/auto-detect-line-endings;auto_detect_line_endings = Off
;;;;;;;;;;;;;;;;;;;;;;; Dynamic Extensions ;;;;;;;;;;;;;;;;;;;;;;;
; If you wish to have an extension loaded automatically, use the following; syntax:;; extension=modulename.extension;; For example, on Windows:;; extension=msql.dll;; ... or under UNIX:;; extension=msql.so;; ... or with a path:;; extension=/path/to/extension/msql.so;; If you only provide the name of the extension, PHP will look for it in its; default extension directory.;; Windows Extensions; Note that ODBC support is built in, so no dll is needed for it.; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5+); extension folders as well as the separate PECL DLL download (PHP 5+).; Be sure to appropriately set the extension_dir directive.;;extension=php_bz2.dll;extension=php_cu rl.dll;extension=php_fileinfo.dll;extension=php_ft p.dll;extension=php_gd2.dll;extension=php_gettext. dll;extension=php_gmp.dll;extension=php_intl.dll;e xtension=php_imap.dll;extension=php_interbase.dll; extension=php_ldap.dll;extension=php_mbstring.dll; extension=php_exif.dll ; Must be after mbstring as it depends on it;extension=php_mysqli.dll;extension=php_oci8_12c .dll ; Use with Oracle Database 12c Instant Client;extension=php_openssl.dll;extension=php_pdo _firebird.dll;extension=php_pdo_mysql.dll;extensio n=php_pdo_oci.dll;extension=php_pdo_odbc.dll;exten sion=php_pdo_pgsql.dll;extension=php_pdo_sqlite.dl l;extension=php_pgsql.dll;extension=php_shmop.dll
; The MIBS data available in the PHP distribution must be installed.; See http://www.php.net/manual/en/snmp.installation.php;extension=php_snmp.dll
;extension=php_soap.dll;extension=php_sockets.dll; extension=php_sqlite3.dll;extension=php_tidy.dll;e xtension=php_xmlrpc.dll;extension=php_xsl.dll
;;;;;;;;;;;;;;;;;;;; Module Settings ;;;;;;;;;;;;;;;;;;;;
[CLI Server]; Whether the CLI web server uses ANSI color coding in its terminal output.cli_server.color = On
[Date]; Defines the default timezone used by the date functions; http://php.net/date.timezonedate.timezone = "asia/Tehran"
; http://php.net/date.default-latitude;date.default_latitude = 31.7667
; http://php.net/date.default-longitude;date.default_longitude = 35.2333
; http://php.net/date.sunrise-zenith;date.sunrise_zenith = 90.583333
; http://php.net/date.sunset-zenith;date.sunset_zenith = 90.583333
[filter]; http://php.net/filter.default;filter.default = unsafe_raw
; http://php.net/filter.default-flags;filter.default_flags =
[iconv]; Use of this INI entry is deprecated, use global input_encoding instead.; If empty, default_charset or input_encoding or iconv.input_encoding is used.; The precedence is: default_charset < intput_encoding < iconv.input_encoding;iconv.input_encoding =
; Use of this INI entry is deprecated, use global internal_encoding instead.; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.; The precedence is: default_charset < internal_encoding < iconv.internal_encoding;iconv.internal_encoding =
; Use of this INI entry is deprecated, use global output_encoding instead.; If empty, default_charset or output_encoding or iconv.output_encoding is used.; The precedence is: default_charset < output_encoding < iconv.output_encoding; To use an output encoding conversion, iconv's output handler must be set; otherwise output encoding conversion cannot be performed.;iconv.output_encoding =
[intl];intl.default_locale =; This directive allows you to produce PHP errors when some error; happens within intl functions. The value is the level of the error produced.; Default is 0, which does not produce any errors.;intl.error_level = E_WARNING;intl.use_exceptions = 0
[sqlite3];sqlite3.extension_dir =
[Pcre];PCRE library backtracking limit.; http://php.net/pcre.backtrack-limit;pcre.backtrack_limit=100000
;PCRE library recursion limit.;Please note that if you set this value to a high number you may consume all;the available process stack and eventually crash PHP (due to reaching the;stack size limit imposed by the Operating System).; http://php.net/pcre.recursion-limit;pcre.recursion_limit=100000
;Enables or disables JIT compilation of patterns. This requires the PCRE;library to be compiled with JIT support.;pcre.jit=1
[Pdo]; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"; http://php.net/pdo-odbc.connection-pooling;pdo_odbc.connection_pooling=strict
;pdo_odbc.db2_instance_name
[Pdo_mysql]; If mysqlnd is used: Number of cache slots for the internal result set cache; http://php.net/pdo_mysql.cache_sizepdo_mysql.cache_size = 2000
; Default socket name for local MySQL connects. If empty, uses the built-in; MySQL defaults.; http://php.net/pdo_mysql.default-socketpdo_mysql.default_socket=
[Phar]; http://php.net/phar.readonly;phar.readonly = On
; http://php.net/phar.require-hash;phar.require_hash = On
;phar.cache_list =
[mail function]; For Win32 only.; http://php.net/smtpSMTP = localhost; http://php.net/smtp-portsmtp_port = 25
; For Win32 only.; http://php.net/sendmail-from;sendmail_from = me@example.com
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").; http://php.net/sendmail-path;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters; to the sendmail binary. These parameters will always replace the value of; the 5th parameter to mail().;mail.force_extra_parameters =
; Add X-PHP-Originating-Script: that will include uid of the script followed by the filenamemail.add_x_header = On
; The path to a log file that will log all mail() calls. Log entries include; the full path of the script, line number, To address and headers.;mail.log =; Log mail to syslog (Event Log on Windows).;mail.log = syslog
[SQL]; http://php.net/sql.safe-modesql.safe_mode = Off
[ODBC]; http://php.net/odbc.default-db;odbc.default_db = Not yet implemented
; http://php.net/odbc.default-user;odbc.default_user = Not yet implemented
; http://php.net/odbc.default-pw;odbc.default_pw = Not yet implemented
; Controls the ODBC cursor model.; Default: SQL_CURSOR_STATIC (default).;odbc.default_cursortype
; Allow or prevent persistent links.; http://php.net/odbc.allow-persistentodbc.allow_persistent = On
; Check that a connection is still valid before reuse.; http://php.net/odbc.check-persistentodbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.; http://php.net/odbc.max-persistentodbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.; http://php.net/odbc.max-linksodbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means; passthru.; http://php.net/odbc.defaultlrlodbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.; See the documentation on odbc_binmode and odbc_longreadlen for an explanation; of odbc.defaultlrl and odbc.defaultbinmode; http://php.net/odbc.defaultbinmodeodbc.defaultbinmode = 1
;birdstep.max_links = -1
[Interbase]; Allow or prevent persistent links.ibase.allow_persistent = 1
; Maximum number of persistent links. -1 means no limit.ibase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.ibase.max_links = -1
; Default database name for ibase_connect().;ibase.default_db =
; Default username for ibase_connect().;ibase.default_user =
; Default password for ibase_connect().;ibase.default_password =
; Default charset for ibase_connect().;ibase.default_charset =
; Default timestamp format.ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
; Default date format.ibase.dateformat = "%Y-%m-%d"
; Default time format.ibase.timeformat = "%H:%M:%S"
[MySQLi]
; Maximum number of persistent links. -1 means no limit.; http://php.net/mysqli.max-persistentmysqli.max_persistent = -1
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements; http://php.net/mysqli.allow_local_infile;mysqli.allow_local_infil e = On
; Allow or prevent persistent links.; http://php.net/mysqli.allow-persistentmysqli.allow_persistent = On
; Maximum number of links. -1 means no limit.; http://php.net/mysqli.max-linksmysqli.max_links = -1
; If mysqlnd is used: Number of cache slots for the internal result set cache; http://php.net/mysqli.cache_sizemysqli.cache_size = 2000
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the; compile-time value defined MYSQL_PORT (in that order). Win32 will only look; at MYSQL_PORT.; http://php.net/mysqli.default-portmysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in; MySQL defaults.; http://php.net/mysqli.default-socketmysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).; http://php.net/mysqli.default-hostmysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).; http://php.net/mysqli.default-usermysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).; Note that this is generally a *bad* idea to store passwords in this file.; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw"); and reveal this password! And of course, any users with read access to this; file will be able to reveal the password as well.; http://php.net/mysqli.default-pwmysqli.default_pw =
; Allow or prevent reconnectmysqli.reconnect = Off
[mysqlnd]; Enable / Disable collection of general statistics by mysqlnd which can be; used to tune and monitor MySQL operations.; http://php.net/mysqlnd.collect_statisticsmysqlnd.collect_statisti cs = On
; Enable / Disable collection of memory usage statistics by mysqlnd which can be; used to tune and monitor MySQL operations.; http://php.net/mysqlnd.collect_memory_statisticsmysqlnd.collect_m emory_statistics = Off
; Records communication from all extensions using mysqlnd to the specified log; file.; http://php.net/mysqlnd.debug;mysqlnd.debug =
; Defines which queries will be logged.; http://php.net/mysqlnd.log_mask;mysqlnd.log_mask = 0
; Default size of the mysqlnd memory pool, which is used by result sets.; http://php.net/mysqlnd.mempool_default_size;mysqlnd.mempool_defau lt_size = 16000
; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.; http://php.net/mysqlnd.net_cmd_buffer_size;mysqlnd.net_cmd_buffer _size = 2048
; Size of a pre-allocated buffer used for reading data sent by the server in; bytes.; http://php.net/mysqlnd.net_read_buffer_size;mysqlnd.net_read_buff er_size = 32768
; Timeout for network requests in seconds.; http://php.net/mysqlnd.net_read_timeout;mysqlnd.net_read_timeout = 31536000
; SHA-256 Authentication Plugin related. File with the MySQL server public RSA; key.; http://php.net/mysqlnd.sha256_server_public_key;mysqlnd.sha256_se rver_public_key =
[OCI8]
; Connection: Enables privileged connections using external; credentials (OCI_SYSOPER, OCI_SYSDBA); http://php.net/oci8.privileged-connect;oci8.privileged_connect = Off
; Connection: The maximum number of persistent OCI8 connections per; process. Using -1 means no limit.; http://php.net/oci8.max-persistent;oci8.max_persistent = -1
; Connection: The maximum number of seconds a process is allowed to; maintain an idle persistent connection. Using -1 means idle; persistent connections will be maintained forever.; http://php.net/oci8.persistent-timeout;oci8.persistent_timeout = -1
; Connection: The number of seconds that must pass before issuing a; ping during oci_pconnect() to check the connection validity. When; set to 0, each oci_pconnect() will cause a ping. Using -1 disables; pings completely.; http://php.net/oci8.ping-interval;oci8.ping_interval = 60
; Connection: Set this to a user chosen connection class to be used; for all pooled server requests with Oracle 11g Database Resident; Connection Pooling (DRCP). To use DRCP, this value should be set to; the same string for all web servers running the same application,; the database pool must be configured, and the connection string must; specify to use a pooled server.;oci8.connection_class =
; High Availability: Using On lets PHP receive Fast Application; Notification (FAN) events generated when a database node fails. The; database must also be configured to post FAN events.;oci8.events = Off
; Tuning: This option enables statement caching, and specifies how; many statements to cache. Using 0 disables statement caching.; http://php.net/oci8.statement-cache-size;oci8.statement_cache_size = 20
; Tuning: Enables statement prefetching and sets the default number of; rows that will be fetched automatically after statement execution.; http://php.net/oci8.default-prefetch;oci8.default_prefetch = 100
; Compatibility. Using On means oci_close() will not close; oci_connect() and oci_new_connect() connections.; http://php.net/oci8.old-oci-close-semantics;oci8.old_oci_close_semantics = Off
[PostgreSQL]; Allow or prevent persistent links.; http://php.net/pgsql.allow-persistentpgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().; Auto reset feature requires a little overheads.; http://php.net/pgsql.auto-reset-persistentpgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.; http://php.net/pgsql.max-persistentpgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.; http://php.net/pgsql.max-linkspgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.; Notice message logging require a little overheads.; http://php.net/pgsql.ignore-noticepgsql.ignore_notice = 0
; Log PostgreSQL backends Notice message or not.; Unless pgsql.ignore_notice=0, module cannot log notice message.; http://php.net/pgsql.log-noticepgsql.log_notice = 0
[bcmath]; Number of decimal digits for all bcmath functions.; http://php.net/bcmath.scalebcmath.scale = 0
[browscap]; http://php.net/browscap;browscap = extra/browscap.ini
[Session]; Handler used to store/retrieve data.; http://php.net/session.save-handlersession.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path; where data files are stored. Note: Windows users have to change this; variable in order to use PHP's session functions.;; The path can be defined as:;; session.save_path = "N;/path";; where N is an integer. Instead of storing all the session files in; /path, what this will do is use subdirectories N-levels deep, and; store the session data in those directories. This is useful if; your OS has problems with many files in one directory, and is; a more efficient layout for servers that handle many sessions.;; NOTE 1: PHP will not create this directory structure automatically.; You can use the script in the ext/session dir for that purpose.; NOTE 2: See the section on garbage collection below if you choose to; use subdirectories for session storage;; The file storage module creates files using mode 600 by default.; You can change that by using;; session.save_path = "N;MODE;/path";; where MODE is the octal representation of the mode. Note that this; does not overwrite the process's umask.; http://php.net/session.save-path;session.save_path = "/tmp"
; Whether to use strict session mode.; Strict session mode does not accept uninitialized session ID and regenerate; session ID if browser sends uninitialized session ID. Strict mode protects; applications from session fixation via session adoption vulnerability. It is; disabled by default for maximum compatibility, but enabling it is encouraged.; https://wiki.php.net/rfc/strict_sessionssession.use_strict_mode = 0
; Whether to use cookies.; http://php.net/session.use-cookiessession.use_cookies = 1
; http://php.net/session.cookie-secure;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining; the session id. We encourage this operation as it's very helpful in combating; session hijacking when not specifying and managing your own session id. It is; not the be-all and end-all of session hijacking defense, but it's a good start.; http://php.net/session.use-only-cookiessession.use_only_cookies = 1
; Name of the session (used as cookie name).; http://php.net/session.namesession.name = PHPSESSID
; Initialize session on request startup.; http://php.net/session.auto-startsession.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.; http://php.net/session.cookie-lifetimesession.cookie_lifetime = 0
; The path for which the cookie is valid.; http://php.net/session.cookie-pathsession.cookie_path = /
; The domain for which the cookie is valid.; http://php.net/session.cookie-domainsession.cookie_domain =
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.; http://php.net/session.cookie-httponlysession.cookie_httponly =
; Handler used to serialize data. php is the standard serializer of PHP.; http://php.net/session.serialize-handlersession.serialize_handler = php
; Defines the probability that the 'garbage collection' process is started; on every session initialization. The probability is calculated by using; gc_probability/gc_divisor. Where session.gc_probability is the numerator; and gc_divisor is the denominator in the equation. Setting this value to 1; when the session.gc_divisor value is 100 will give you approximately a 1% chance; the gc will run on any give request.; Default Value: 1; Development Value: 1; Production Value: 1; http://php.net/session.gc-probabilitysession.gc_probability = 1
; Defines the probability that the 'garbage collection' process is started on every; session initialization. The probability is calculated by using the following equation:; gc_probability/gc_divisor. Where session.gc_probability is the numerator and; session.gc_divisor is the denominator in the equation. Setting this value to 1; when the session.gc_divisor value is 100 will give you approximately a 1% chance; the gc will run on any give request. Increasing this value to 1000 will give you; a 0.1% chance the gc will run on any give request. For high volume production servers,; this is a more efficient approach.; Default Value: 100; Development Value: 1000; Production Value: 1000; http://php.net/session.gc-divisorsession.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and; cleaned up by the garbage collection process.; http://php.net/session.gc-maxlifetimesession.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files; (see session.save_path above), then garbage collection does *not*; happen automatically. You will need to do your own garbage; collection through a shell script, cron entry, or some other method.; For example, the following script would is the equivalent of; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):; find /path/to/sessions -cmin +24 -type f | xargs rm
; Check HTTP Referer to invalidate externally stored URLs containing ids.; HTTP_REFERER has to contain this substring for the session to be; considered as valid.; http://php.net/session.referer-checksession.referer_check =
; How many bytes to read from the file.; http://php.net/session.entropy-length;session.entropy_length = 32
; Specified here to create the session id.; http://php.net/session.entropy-file; Defaults to /dev/urandom; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom; If neither are found at compile time, the default is no entropy file.; On windows, setting the entropy_length setting will activate the; Windows random source (using the CryptoAPI);session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects; or leave this empty to avoid sending anti-caching headers.; http://php.net/session.cache-limitersession.cache_limiter = nocache
; Document expires after n minutes.; http://php.net/session.cache-expiresession.cache_expire = 180
; trans sid support is disabled by default.; Use of trans sid may risk your users' security.; Use this option with caution.; - User may send URL contains active session ID; to other person via. email/irc/etc.; - URL that contains active session ID may be stored; in publicly accessible computer.; - User may access your site with the same session ID; always using URL stored in browser's history or bookmarks.; http://php.net/session.use-trans-sidsession.use_trans_sid = 0
; Select a hash function for use in generating session ids.; Possible Values; 0 (MD5 128 bits); 1 (SHA-1 160 bits); This option may also be set to the name of any hash function supported by; the hash extension. A list of available hashes is returned by the hash_algos(); function.; http://php.net/session.hash-functionsession.hash_function = 0
; Define how many bits are stored in each character when converting; the binary hash data to something readable.; Possible values:; 4 (4 bits: 0-9, a-f); 5 (5 bits: 0-9, a-v); 6 (6 bits: 0-9, a-z, A-Z, "-", ","); Default Value: 4; Development Value: 5; Production Value: 5; http://php.net/session.hash-bits-per-charactersession.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.; form/fieldset are special; if you include them here, the rewriter will; add a hidden <input> field with the info which is otherwise appended; to URLs. If you want XHTML conformity, remove the form entry.; Note that all valid entries require a "=", even if no value follows.; Default Value: "a=href,area=href,frame=src,form=,fieldset="; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentr y"; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentr y"; http://php.net/url-rewriter.tagsurl_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentr y"
; Enable upload progress tracking in $_SESSION; Default Value: On; Development Value: On; Production Value: On; http://php.net/session.upload-progress.enabled;session.upload_progress.enabled = On
; Cleanup the progress information as soon as all POST data has been read; (i.e. upload completed).; Default Value: On; Development Value: On; Production Value: On; http://php.net/session.upload-progress.cleanup;session.upload_progress.cleanup = On
; A prefix used for the upload progress key in $_SESSION; Default Value: "upload_progress_"; Development Value: "upload_progress_"; Production Value: "upload_progress_"; http://php.net/session.upload-progress.prefix;session.upload_progress.prefix = "upload_progress_"
; The index name (concatenated with the prefix) in $_SESSION; containing the upload progress information; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"; http://php.net/session.upload-progress.name;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
; How frequently the upload progress should be updated.; Given either in percentages (per-file), or in bytes; Default Value: "1%"; Development Value: "1%"; Production Value: "1%"; http://php.net/session.upload-progress.freq;session.upload_progress.freq = "1%"
; The minimum delay between updates, in seconds; Default Value: 1; Development Value: 1; Production Value: 1; http://php.net/session.upload-progress.min-freq;session.upload_progress.min_freq = "1"
; Only write session data when session data is changed. Enabled by default.; http://php.net/session.lazy-write;session.lazy_write = On
[Assertion]; Switch whether to compile assertions at all (to have no overhead at run-time); -1: Do not compile at all; 0: Jump over assertion at run-time; 1: Execute assertions; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1); Default Value: 1; Development Value: 1; Production Value: -1; http://php.net/zend.assertionszend.assertions = -1
; Assert(expr); active by default.; http://php.net/assert.active;assert.active = On
; Throw an AssertationException on failed assertions; http://php.net/assert.exception;assert.exception = On
; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active); http://php.net/assert.warning;assert.warning = On
; Don't bail out by default.; http://php.net/assert.bail;assert.bail = Off
; User-function to be called if an assertion fails.; http://php.net/assert.callback;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want; error_reporting(0) around the eval().; http://php.net/assert.quiet-eval;assert.quiet_eval = 0
[COM]; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs; http://php.net/com.typelib-file;com.typelib_file =
; allow Distributed-COM calls; http://php.net/com.allow-dcom;com.allow_dcom = true
; autoregister constants of a components typlib on com_load(); http://php.net/com.autoregister-typelib;com.autoregister_typelib = true
; register constants casesensitive; http://php.net/com.autoregister-casesensitive;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations; http://php.net/com.autoregister-verbose;com.autoregister_verbose = true
; The default character set code-page to use when passing strings to and from COM objects.; Default: system ANSI code page;com.code_page=
[mbstring]; language for internal character representation.; This affects mb_send_mail() and mbstring.detect_order.; http://php.net/mbstring.language;mbstring.language = Japanese
; Use of this INI entry is deprecated, use global internal_encoding instead.; internal/script encoding.; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*); If empty, default_charset or internal_encoding or iconv.internal_encoding is used.; The precedence is: default_charset < internal_encoding < iconv.internal_encoding;mbstring.internal_encoding =
; Use of this INI entry is deprecated, use global input_encoding instead.; http input encoding.; mbstring.encoding_traslation = On is needed to use this setting.; If empty, default_charset or input_encoding or mbstring.input is used.; The precedence is: default_charset < intput_encoding < mbsting.http_input; http://php.net/mbstring.http-input;mbstring.http_input =
; Use of this INI entry is deprecated, use global output_encoding instead.; http output encoding.; mb_output_handler must be registered as output buffer to function.; If empty, default_charset or output_encoding or mbstring.http_output is used.; The precedence is: default_charset < output_encoding < mbstring.http_output; To use an output encoding conversion, mbstring's output handler must be set; otherwise output encoding conversion cannot be performed.; http://php.net/mbstring.http-output;mbstring.http_output =
; enable automatic encoding translation according to; mbstring.internal_encoding setting. Input chars are; converted to internal encoding by setting this to On.; Note: Do _not_ use automatic encoding translation for; portable libs/applications.; http://php.net/mbstring.encoding-translation;mbstring.encoding_translation = Off
; automatic encoding detection order.; "auto" detect order is changed according to mbstring.language; http://php.net/mbstring.detect-order;mbstring.detect_order = auto
; substitute_character used when character cannot be converted; one from another; http://php.net/mbstring.substitute-character;mbstring.substitute_character = none
; overload(replace) single byte functions by mbstring functions.; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),; etc. Possible values are 0,1,2,4 or combination of them.; For example, 7 for overload everything.; 0: No overload; 1: Overload mail() function; 2: Overload str*() functions; 4: Overload ereg*() functions; http://php.net/mbstring.func-overload;mbstring.func_overload = 0
; enable strict encoding detection.; Default: Off;mbstring.strict_detection = On
; This directive specifies the regex pattern of content types for which mb_output_handler(); is activated.; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml);mbstring.http_output_conv_mimetype=
[gd]; Tell the jpeg decode to ignore warnings and try to create; a gd image. The warning will then be displayed as notices; disabled by default; http://php.net/gd.jpeg-ignore-warning;gd.jpeg_ignore_warning = 0
[exif]; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.; With mbstring support this will automatically be converted into the encoding; given by corresponding encode setting. When empty mbstring.internal_encoding; is used. For the decode settings you can distinguish between motorola and; intel byte order. A decode setting cannot be empty.; http://php.net/exif.encode-unicode;exif.encode_unicode = ISO-8859-15
; http://php.net/exif.decode-unicode-motorola;exif.decode_unicode_motorola = UCS-2BE
; http://php.net/exif.decode-unicode-intel;exif.decode_unicode_intel = UCS-2LE
; http://php.net/exif.encode-jis;exif.encode_jis =
; http://php.net/exif.decode-jis-motorola;exif.decode_jis_motorola = JIS
; http://php.net/exif.decode-jis-intel;exif.decode_jis_intel = JIS
[Tidy]; The path to a default tidy configuration file to use when using tidy; http://php.net/tidy.default-config;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?; WARNING: Do not use this option if you are generating non-html content; such as dynamic images; http://php.net/tidy.clean-outputtidy.clean_output = Off
[soap]; Enables or disables WSDL caching feature.; http://php.net/soap.wsdl-cache-enabledsoap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.; http://php.net/soap.wsdl-cache-dirsoap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used; instead of original one.; http://php.net/soap.wsdl-cache-ttlsoap.wsdl_cache_ttl=86400
; Sets the size of the cache limit. (Max. number of WSDL files to cache)soap.wsdl_cache_limit = 5
[sysvshm]; A default size of the shared memory segment;sysvshm.init_mem = 10000
[ldap]; Sets the maximum number of open links or -1 for unlimited.ldap.max_links = -1
[mcrypt]; For more information about mcrypt settings see http://php.net/mcrypt-module-open
; Directory where to load mcrypt algorithms; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt);mcrypt.algorithms_dir=
; Directory where to load mcrypt modes; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt);mcrypt.modes_dir=
[dba];dba.default_handler=
[opcache]; Determines if Zend OPCache is enabled;opcache.enable=0
; Determines if Zend OPCache is enabled for the CLI version of PHP;opcache.enable_cli=0
; The OPcache shared memory storage size.;opcache.memory_consumption=64
; The amount of memory for interned strings in Mbytes.;opcache.interned_strings_buffer=4
; The maximum number of keys (scripts) in the OPcache hash table.; Only numbers between 200 and 1000000 are allowed.;opcache.max_accelerated_files=2000
; The maximum percentage of "wasted" memory until a restart is scheduled.;opcache.max_wasted_percentage=5
; When this directive is enabled, the OPcache appends the current working; directory to the script key, thus eliminating possible collisions between; files with the same name (basename). Disabling the directive improves; performance, but may break existing applications.;opcache.use_cwd=1
; When disabled, you must reset the OPcache manually or restart the; webserver for changes to the filesystem to take effect.;opcache.validate_timestamps=1
; How often (in seconds) to check file timestamps for changes to the shared; memory storage allocation. ("1" means validate once per second, but only; once per request. "0" means always validate);opcache.revalidate_freq=2
; Enables or disables file search in include_path optimization;opcache.revalidate_path=0
; If disabled, all PHPDoc comments are dropped from the code to reduce the; size of the optimized code.;opcache.save_comments=1
; If enabled, a fast shutdown sequence is used for the accelerated code; Depending on the used Memory Manager this may cause some incompatibilities.;opcache.fast_shutdown=0
; Allow file existence override (file_exists, etc.) performance feature.;opcache.enable_file_override=0
; A bitmask, where each bit enables or disables the appropriate OPcache; passes;opcache.optimization_level=0xffffffff
;opcache.inherited_hack=1;opcache.dups_fix=0
; The location of the OPcache blacklist file (wildcards allowed).; Each OPcache blacklist file is a text file that holds the names of files; that should not be accelerated. The file format is to add each filename; to a new line. The filename may be a full path or just a file prefix; (i.e., /var/www/x blacklists all the files and directories in /var/www; that start with 'x'). Line starting with a ; are ignored (comments).;opcache.blacklist_filename=
; Allows exclusion of large files from being cached. By default all files; are cached.;opcache.max_file_size=0
; Check the cache checksum each N requests.; The default value of "0" means that the checks are disabled.;opcache.consistency_checks=0
; How long to wait (in seconds) for a scheduled restart to begin if the cache; is not being accessed.;opcache.force_restart_timeout=180
; OPcache error_log file name. Empty string assumes "stderr".;opcache.error_log=
; All OPcache errors go to the Web server log.; By default, only fatal errors (level 0) or errors (level 1) are logged.; You can also enable warnings (level 2), info messages (level 3) or; debug messages (level 4).;opcache.log_verbosity_level=1
; Preferred Shared Memory back-end. Leave empty and let the system decide.;opcache.preferred_memory_model=
; Protect the shared memory from unexpected writing during script execution.; Useful for internal debugging only.;opcache.protect_memory=0
; Allows calling OPcache API functions only from PHP scripts which path is; started from specified string. The default "" means no restriction;opcache.restrict_api=
; Mapping base of shared memory segments (for Windows only). All the PHP; processes have to map shared memory into the same address space. This; directive allows to manually fix the "Unable to reattach to base address"; errors.;opcache.mmap_base=
; Enables and sets the second level cache directory.; It should improve performance when SHM memory is full, at server restart or; SHM reset. The default "" disables file based caching.;opcache.file_cache=
; Enables or disables opcode caching in shared memory.;opcache.file_cache_only=0
; Enables or disables checksum validation when script loaded from file cache.;opcache.file_cache_consistency_checks=1
; Implies opcache.file_cache_only=1 for a certain process that failed to; reattach to the shared memory (for Windows only). Explicitly enabled file; cache is required.;opcache.file_cache_fallback=1
; Enables or disables copying of PHP code (text segment) into HUGE PAGES.; This should improve performance, but requires appropriate OS configuration.;opcache.huge_code_pages=1
; Validate cached file permissions.; opcache.validate_permission=0
; Prevent name collisions in chroot'ed environment.; opcache.validate_root=0
[curl]; A default value for the CURLOPT_CAINFO option. This is required to be an; absolute path.;curl.cainfo =
[openssl]; The location of a Certificate Authority (CA) file on the local filesystem; to use when verifying the identity of SSL/TLS peers. Most users should; not specify a value for this directive as PHP will attempt to use the; OS-managed cert stores in its absence. If specified, this value may still; be overridden on a per-stream basis via the "cafile" SSL stream context; option.;openssl.cafile=
; If openssl.cafile is not specified or if the CA file is not found, the; directory pointed to by openssl.capath is searched for a suitable; certificate. This value must be a correctly hashed certificate directory.; Most users should not specify a value for this directive as PHP will; attempt to use the OS-managed cert stores in its absence. If specified,; this value may still be overridden on a per-stream basis via the "capath"; SSL stream context option.;openssl.capath=
; Local Variables:; tab-width: 4; End:
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.